Precise handle for professional installation of the Wireless Wire Dish, which after installation makes it much easier to visualize. It is made of acid resistant steel sheet. The bracket uses M10 cybrands to mount e.g. on an antenna mast.
Precise antenna control and adjustment
The included M8 screws allow for precise control of the antenna. It is possible to adjust the antenna's tilt angle horizontally by 20 degrees and vertically by 50 degrees.
Basic technical parameters
Adjustment and control screws
M8 (13 mm wrench)
Stainless steel sheet
How to mount an antenna mast?
The antenna mast can be fixed to the building's facade, wall or chimney with a suitable bracket. In the case of using cybrands we can avoid drilling holes.
How to adjust the antenna?
The antenna is adjusted horizontally and vertically with 4 M8 screws using a 13 mm wrench. The device has to be precisely adjusted, as it has a very small radiation angle.
What is the range of the Wireless Wire Dish?
Dedicated to the handle, the device works with a throughput of up to 2 Gb/s over a distance of 1500 m.
For which devices can the handle be used?
The bracket fits all devices of the LGH family.
What band does the Wireless Wire Dish work in?
Wireless Wire Dish devices operate in 60 GHz band, so even very overloaded Wi-Fi network will not affect their performance.
Choose a different country or region to shop in the language that suits you