FIBARO Temperature Sensor is a dedicated temperature sensor for Heat Controller, which provides more accurate readings and proper room temperature control. The ergonomic shapeof the sensor makes it easy to operate, inspired by nature harmonizes well with interior design.
For each Heat Controller head, only one sensor can be paired, which will be used as reference point temperature, but each temperature sensor supports up to three thermostatic heads, i.e., to sum up, one sensor can operate with up to three heads, while one head can operate with only one sensor. The temperature sensor can be placed or mounted anywhere thanks to its wireless communication.
| Features / filters | |
| Type of sensor | Temperature |
| Device type | Sensor |
| Power supply | Battery CR2032, 3.0 V (supplied) |
| Technical Specification | |
| Operating temperature | 0° to 40°C |
| Storage temperature | -10° to 40°C |
| Accuracy of temperature measurement | 0.5°C (within the range 0° to 40°C) |
| Dimensions (diameter x height) | 38 x 12 mm |
| Radio frequency band | 2.4 GHz ISM |
| Maximum transmitting power | EIRP up to 6.5 dBm |
| Compliance with EU directives | RoHS 2011/65/EU RED 2014/53/EU |
The sensor requires pairing with FIBARO The Heat Controller. After pairing, the sensor will automatically cooperate with the head.
No, FIBARO Temperature Sensor is a dedicated sensor for FIBARO The Heat Controller and works in conjunction with it.
The sensor must be in the same room as the Heat Controller paired with it. It can be laid or installed anywhere, but for correct temperature measurements it is best where it will not be touched by humans or animals.
Click and hold the button on the sensor for 2 seconds. The sensor LED flashes 3 times to confirm the evaporation.
The process of device pairing has been described in detail in instruction manual.