Fibaro FGBS-001 | Binary Sensor |
Fibaro FGBS-001 | Binary Sensor |

Fibaro FGBS-001 | Binary Sensor |

CODE: FGBS-001 / EAN: 5902020528074
32,25 GBP with VAT
OUT OF STOCK

ABOUT PRODUCT

Wireless data collection from alarm sensors

FIBARO Universal Binary Sensor is a wireless module that enables increase the functionality of any sensor with binary output to communicate with the wireless network Z-Wave. The module is most often used to integrate the FIBARO wireless system with wired and wireless alarm systems. The sensor as an element of the security system is transparent for parametric alarm lines.

FIBARO UNIVERSAL BINARY SENSOR FGBS-001

Multi-sensor support

Universal Binary Sensor supports up to two binary sensors and up to 4 temperature sensors DS18B20. The sensor is suitable for mounting in a sensor housing or other device. It can operate in humid environment and in high temperature using appropriate protection.

FIBARO UNIVERSAL BINARY SENSOR FGBS-001

Features FIBARO UNIVERSAL BINARY SENSOR FGBS-001

  • Compatibility with any Z-Wave controller
  • Advanced microprocessor control
  • Compatibility with binary sensors (can be connected to 2 binary outputs)
  • Compatible with normal and parametric alarm lines (can be connected to 2 alarm detectors)
  • Compatible with DS18B20 temperature sensors (can be connected to four DS18B20 temperature sensors)

SPECIFICATION

Features / filters
Type of sensor Not applicable
Device type Accessories

Power supply 9-30 V DC ±10%
Technical Specification
Outputs 2 potential-free outputs
Entrances 2 potential-free inputs
1 digital input 1-wire
Maximum current-carrying capacity of outputs 150 mA
Operating temperature 0°C to 40°C
Radio signal strength Up to 1 mW
Measuring range -55°C to 126°C
In accordance with EU standards RoHS 2011/65/EU
EMC 2004/108/EC
R&TTE 1999/5/EC
Radio transmitter power up to -1 dBm (EIRP)
Supported temperature sensors Up to 4 DS18B20 sensors
Radio protocol Z-Wave
Reach Up to 50 m outdoors
Up to 30 m inside buildings
(depending on building materials)
Radio frequency 868.4 MHz EU
908.4 MHz US
921.4 MHz ANZ
869.0 MHz RU
865.2 MHz IN
Dimensions (L x W x H) 27.3 x 14.5 x 12 mm
Maximum voltage at the output contacts 36 V DC/24 V AC ±5%

SUPPORT

Downloads

Operating instructions - EN - FGBS-001 Download
Operating instructions - FGBS-001 Download
Quick Start Guide - FGBS-001 Download

FAQ

Can I use other 1-wire devices than DS18B20 sensors?

No, the universal binary sensor is only 1-wire compatible with DS18B20 sensors.

Why can't OUT1 and OUT2 outputs be controlled?

Please note that the universal binary sensor is an input module. It has been designed to work with sensors and alarm systems, changing its state would be dangerous for safety measures.

How long can a 1-wire line for DS18B20 sensors be?

It should not exceed 30 m.

Is the universal binary sensor also a Z-Wave signal amplifier?

Yes, the universal binary sensor has full Z-Wave signal amplification capabilities.

What signals should be delivered to IN1 and IN2 inputs?

Only GND signal can be supplied. This signal should be common to the GND of the universal sensor module.

Choose a different country or region to shop in the language that suits you
Our site uses cookies (so-called "cookies"). You can find more about these files, as well as about how we process your personal data, in our privacy policy.