FIBARO Swipe detects simple movements and their combinations. The Gesture Sensor high resolution free interprets the most expanded commands. Controlling smart house is very simple. Just raise your hand and move it down to turn off the light. Lift your hand to make the LED strips light up the ceiling. Swipe to the right if you want to turn off the TV and other audio-visual equipment. There are many configuration options.
FIBARO Swipe harmonizes with interior design. You can put it on the chest of drawers or hang it on the wall among other photographs. Refined to the smallest detail, it resembles a image frame. The gesture sensor allows personalisation with a selected photo. If you don't want swipe to be an element of the decor, hide it under the kitchen worktop, bench or desk and it will still react to gestures made over it.
|Working current||< 60mA|
|Power supply||5V DC power supply and/or batteries|
|DC power connector||micro-USB|
|Compliance with EU directives||RED 2014/53/EU
|Radio protocol||Z-Wave (500 series chip)|
|Battery type||4 x 1.5V AA|
|Radio transmitter power||up to 5 dBm (EIRP)|
|Dimensions||178 x 130 x 29 mm|
|Radio frequency||868.4, 869.8 MHz EU
908.4, 916.0 MHz US
921.4, 919.8 MHz ANZ
869.0 MHz RU
|Reach||up to 50 m outside
up to 40 m indoors
(depending on the terrain and structure of the building)
There are four basic gestures (up, down, left, right). Additionally, you can enable circular gestures in parameter 10: circle right, circle left. You can also use 6 combinations of basic gestures. A maximum of 12 gestures and combinations can be used.
SWIPE can work with any non-metallic material: wood, dry plaster, stone (granite, marble), as well as glass (single layer), laminate and any synthetic material. It will not work through metal or a mirror. Thickness may vary depending on the material.
The maximum distance is about 5 cm (2").
10 x 15 cm (6 x 4 inches).
Any Z-Wave device, virtual device or any device in any scene can be assigned to one of the gestures/combinations.