RB260GS is a small SOHO switch. It has five Gigabit Ethernet ports and SFP connector powered by Atheros switch.
Tested and recommended for use with MicroTik SFP modules: S-85DLC05D, S-31DLC20D and S-35/53LC20D (not included)
The SwOS software is configurable from a web browser. It offers all basic functions for the managed switch: It allows you to manage port-to-port forwarding, use MAC filtering, configure VLANs, mirror traffic, limit bandwidth, and even adjust some MAC and IP header fields.
|Basic technical parameters|
|Built-in memory||96K SRAM|
|Ethernet||(5) 10/100/1000 Ethernet ports
Atheros switch AR8327
|SFP||One Gigabit Ethernet SFP frame with DDMI support (Mini-GBIC; SFP module not included)|
|LEDs||Power supply, NAND activity, 5 Ethernet activity LEDs|
|Power options||PoE: 8-30 V DC on Ether1 (without 802.3af). Socket 8-30 V DC|
|Dimensions||113×138×29 mm. Without packaging and power supply: 212g|
|Electricity consumption||Up to 6W|
|Operating temperature||-25C ... +65C|
|Operating system||SwOS MicroTik|
Look for the reset button marked "RES" on the MikroTik router. Then turn off the power to the device. Hold down the reset button and do not release it. Turn on the device power and wait for the "ACT" LED to flash. Finally, release the button to clear the configuration.
The software is configurable from a web browser. It offers all the basic functions of a managed switch, as well as: it allows you to manage port-to-port forwarding, use MAC filter, configure VLANs, mirror traffic, apply bandwidth restrictions, and even adjust some MAC fields and IP header.
Each router is configured at the factory with IP address 192.168.88.1/24 on Ethernet port1. The default user name is admin without password. After the first login, please create a new user with the password in the "full" group, log in again and remove the default admin user.