LtAP mini is a small, weather-resistant wireless access point with integrated LTE antennas and a miniPCI-e socket, so you can use your own LTE modem.
LtAP mini also has one Ethernet LAN 10/100 port for wired devices. The RS232 serial port provides access to the console for debugging. The device has several power options: 9-30V PoE input via Ethernet port, DC and microUSB socket.
LtAP mini has a special housing with a wall-mounting kit, two SIM sockets per shift between suppliers and integrated GPS support, making it ideal for use in moving vehicles such as cars, buses and trains. Use the built-in GPS module to track the position of the vehicle in real time.
|Features / filters|
|Maximum wireless transmission speed||300 Mb/s|
|Number of LAN ports||1x 10/100BaseTX (RJ45)|
|Operating frequency||2.4 GHz|
|Wireless network standards||IEEE 802.11n, IEEE 802.11g, IEEE 802.11b,|
|Additional connectors / interfaces||1x miniPCI-e, SIM, RS232,|
|Type of device power supply||PoE 802.3af/at, Power supply,|
|Basic technical parameters|
|CPU||QCA9531 650 MHz|
|Size of RAM||64 MB|
|10/100 fast Ethernet ports||1|
|Wireless network||Built-in 2.4 GHz 802.11b/g/n, dual-chain|
|Rules for wireless communications||The specific frequency range may be limited by national regulations.|
|Antenna beam width||360°.|
|Wireless antenna amplification||1.5 dBi|
|GPS||Built-in MT3337V, with u.FL RF connector (external antenna required)|
|SIM socket||2 mini SIM sockets|
|LTE modem||There is no
(miniPCI-e LTE card slot available)
|Serial port||RS232 (shared with GPS port)|
|Supported input voltage||PoE input 10 V - 57 V (passive PoE and 802.3af/at with unshielded cable)
Socket DC: 8 - 30 V
MicroUSB: 5 V
|Dimensions||139 × 77 × 28,5 mm|
|Operating temperature||-40°C +70°C|
|Maximum power consumption||4 W|
Firewall, Routing, MPLS, VPN, Wireless, DHCP, Hotspot, QoS, Proxy and more.
When you install RouterOS software or turn on the router for the first time, there are different ways to connect to it:
- Access to command line interface (CLI) via Telnet, SSH, serial cable
- Access to the graphic interface (WebFig)
- Using the WinBox configuration tool (Windows application)
Each router is configured at the factory with IP address 192.168.88.1/24 on Ethernet port1. The default user name is admin without password. After logging in for the first time, please create a new user with the password in group "full". , log in again and delete the default administrator user.
Yes! Access to the router is protected by username and password. Additional users can be added if necessary. Each user group can be assigned specific rights. You can restrict access to the router, which is protected by a user name and password. Additional users can be added to the router; specific permissions can be set for user groups. Remote access to the router can be restricted by the user, IP address. Firewall filtering is the easiest way to protect your router and network.