Version RB922UAGS-5HPacT-NM is equipped with miniPCI-express socket, SIM socket for 3G/4G device or additional wireless card, 3x3 802.11ac three-chain wireless card with high power and three RP-SMA connectors for external antennas.
NetMETAL is a completely new product equipped with a 5GHz QCA9880 radio module, which works in 802.11ac standard. Its robust construction is resistant to the toughest conditions, but at the same time it is easy to use and can be opened and closed with one hand. The robust aluminum housing also functions as a reliable radio with high output power.
NetMETAL is equipped with a powerful 720Mhz processor, 128MB RAM memory, one Gigabit Ethernet port, 802.11ac WLAN, one SFP frame, USB connector, RP-SMA to connect external antennas and RouterOS L4 license.
|Features / filters|
|LAN standard||Gigabit Ethernet 10/100/1000 Mb/s|
|Maximum wireless transmission speed||1300 Mb/s|
|Number of LAN ports||1x 10/100/1000BaseTX (RJ45), 1x SFP (1,25G),|
|Operating frequency||5 GHz|
|Wireless network standards||IEEE 802.11a, IEEE 802.11ac, IEEE 802.11n,|
|CPU frequency||720 MHz|
|Device type||Base station|
|Type of device power supply||Passive PoE|
|Basic technical parameters:|
|Number of processor cores||1x|
|Nominal processor frequency||720MHz cpu|
|Size of RAM||128MB Ram|
|Type of storage||NAND|
|Tested ambient temperature||From -40 ° C to 70 ° C|
|PoE in||Passive PoE|
|PoE at the input Voltage||8-30 V.|
|Number of DC inputs||1 (PoE-IN)|
|Maximum energy consumption||23 W.|
|5 GHz wireless transmission speed Max||1300 Mbit/s|
|Number of 5 GHz wireless chains||3|
|5 GHz wireless standards||802.11a/n/ac|
|5 GHz wireless model||QCA9880|
|5 GHz wireless generation||Wi-Fi 5|
|Ethernet||1x Gigabit port with Auto-MDI/X|
|Ports SFP||1x sfp ports|
|Number of SIM sockets||1 modem (Mini SIM)|
|Number of USB ports||1x|
|USB power reset||Yes|
|Type of USB socket||USB type A.|
|Maximum USB current||1A|
|PCB temperature monitor||Yes|
|Case law||" RED, FCC, IC, EAC, ROHS|
|Set composition||The device
Power supply 24 V / 1.2 A
MiniPCI mounting screws
DIN Rail Bracket
2 plastic bands
Press the button, switch on the device when the LED starts blinking - let go and have the factory settings in a few seconds.
Communication bus used to connect devices to the motherboard.
It is a layer 2 protocol used to establish a point-to-point serial link mainly between two computers, rarely between a computer and a router or between two routers.