The RB2011iL-IN model is the basic model of the MikroTik router and has five Gigabit Ethernet ports, five Fast Ethernet ports and PoE support. It runs on a powerful 600 MHz Atheros processor, has 64 MB RAM and RouterOS software with level 4 license.
Port #10 supports PoE output. This port can be used to power other devices supporting power supply via PoE with the same voltage as applied to RB2011iL-IN. Maximum load on the port is 500mA.
The set includes a device in a housing and a power supply. The set for mounting the device on the wall is available as an accessory.
|Basic technical parameters|
|CPU frequency||600 MHz|
|Number of CPU cores||1|
|Size of RAM||64 MB|
|Number of 10/100 Ethernet ports||5|
|10/100/1000 Ethernet ports||5|
|Supported input voltage||8 V - 28 V|
|Ambient temperature during operation||-35C to +65C|
|RouterOS level license||4|
|Max. power consumption||8W|
No, he can't.
You can change your assigned ports using the /ip service
When you install RouterOS software or turn on the router for the first time, there are different ways to connect to it:
- Access to command line interface (CLI) via Telnet, SSH, serial cable
- Access to the graphic interface (WebFig)
- Using the WinBox configuration tool (Windows application)
Each router is configured at the factory with IP address 192.168.88.1/24 on Ethernet port1. The default user name is admin without password. After logging in for the first time, please create a new user with the password in group "full". , log in again and delete the default administrator user.