Mikrotik Routerboard RB911G-2HPnD is a small wireless router with built-in 2.4 GHz high power wireless card. Gigabit port allows you to fully exploit the potential of 802.11n wireless speed. Integrated wireless card with performance up to 1000mW. It has a built-in 16kV ESD protection on both Ethernet and MMCX ports.
|Features / filters|
|LAN standard||Gigabit Ethernet 10/100/1000 Mb/s|
|Number of LAN ports||1x 10/100/1000BaseTX (RJ45)|
|Operating frequency||2.4 GHz|
|Wireless network standards||IEEE 802.11b, IEEE 802.11g, IEEE 802.11n,|
|Antenna gain||Under 10dbi|
|Device type||Wireless router|
|Management||By web browser|
|Type of case||Without enclosure|
|Basic technical parameters|
|CPU frequency||600 MHz|
|Number of CPU cores||1|
|Number of RAM||32 MB|
|10/100 Ethernet ports||0|
|10/100/1000 Ethernet ports||1|
|CPU temp monitor||None|
|PCB temp monitor||Yes|
|Range of working temperature||-35C...+65C|
|Max. energy consumption||11W|
RouterBOARD is a hardware platform from MikroTik, which is a line of routers with RouterOS operating system. Almost all models of RouterBOARD devices can be powered via Ethernet (PoE) and have a connector for external power source.
Look for the reset button marked "RES" on the MikroTik router. Then turn off the power to the device. Hold down the reset button and do not release it. Turn on the device power and wait for the "ACT" LED to flash. Finally, release the button to clear the configuration.
Each router is configured at the factory with IP address 192.168.88.1/24 on Ethernet port1. The default user name is admin without password. After the first login, please create a new user with the password in the "full" group, log in again and remove the default admin user.