SXT 4G is a device designed for remote locations within the range of a mobile network. However, thanks to the professional design of LTE chip and high gain antenna, it can provide communication for your building where mobile phones cannot. The device is equipped with two Ethernet ports, so you can use it to power another device. The device has a 24 V power supply, but can handle the full voltage range of 12-57 V and 18-57 V with PoE output and is compliant with 802.3af/at.
The device has a built-in high quality modem 4G/LTE Category 4 for speeds up to 150 Mbit/s download and 50 Mbit/s upload, as well as two Micro SIM sockets for backup link. RBSXTR&R11e-4G includes an LTE modem supporting FDD 3 (1800MHz), 7 (2600MHz), 20 (800MHz) and 31 (450MHz) LTE bands and TDD 41n (2500MHz), 42 (3500MHz) and 43 (3700MHz) LTE bands.
|Features / filters|
|LTE category||Cat.4 (150Mb/s Download, 50Mb/s Upload)|
|Number of LAN ports||2x 10/100BaseTX (RJ45)|
|Additional connectors / interfaces||SIM, 1x miniPCI-e,|
|LTE bands||B20 (800MHz), B3 (1800MHz), B7 (2600MHz), B31 (450MHz), B41n (2500MHz), B42 (3500MHz), B43 (3700MHz),|
|Type of device power supply||PoE 802.3af/at|
|Basic technical parameters|
|CPU||QCA9531 650 MHz|
|Size of RAM||64 MB|
|Flash storage||16 MB|
|LTE antenna amplification||10.5 dBi|
|Antenna beam width||60°|
|LTE category||4 (150Mbps download, 50Mbps upload)|
|SIM socket||2 (Micro SIM)|
|Input PoE||Yes, on Ether1|
|Output PoE||Yes, on Ether2, max output per port (input < 30 V): 600 mA, max output per port (input > 30 V): 400 mA, max. total sum (A): 600 mA|
|Supported input voltage||18 - 57 V (Passive PoE, 802.3af/at on Ether2)|
|Dimensions||140 × 140 × 140 × 103 mm|
|Operating temperature||-40°C ... +60°C|
|Maximum power consumption||6 W|
Yes! Access to the router is protected by username and password. Additional users can be added if necessary. Each user group can be assigned specific rights. You can restrict access to the router, which is protected by a user name and password. Additional users can be added to the router; specific permissions can be set for user groups. Remote access to the router can be restricted by the user, IP address. Firewall filtering is the easiest way to protect your router and network.
User name is 'admin' and there is no password (press 'Enter'). To change password use '/password' command.
To update your software, you must download the latest package files (*.npk) from our website. Then connect to your router via FTP and upload the new packages to it using the binary transfer mode. Restart your router by issuing the command /system reboot.