The NETGEAR ProSAFE WC7500 NETGEAR Wireless Controller is a fully featured, high-performance, level wireless controller that manages up to 15 access point 'ow (with basic support for 10 access points and an optional license to support 5 additional access points) for small and medium-sized enterprises. The NETGEAR WC7500 provides ultra-fast access point detection, fast layer 2 and 3 roaming, a guest access portal, a fully distributed architecture, and ease of configuration and management.
The NETGEAR ProSAFE WC7500 manages a full line of NETGEAR ProSAFE access points, from basic single-lane access points (WNAP210 and WNAP320), to business-class dual-lane access points (WNDAP350 and WNDAP360), high performance 3x3: 450 Mb / s for dual-band concurrent AP radio (WNDAP660), for specialized wall-mounted APs (WN370) and external APs (WND930), for a full line of the fastest AP 802 in the industry.11 ac (WAC720 and WAC730) and all with one mouse click.
Unlike other wireless systems that are expensive, complex and cumbersome to implement, the NETGEAR WC7500 wireless controller is ideal for use in education, hospitality and health. Designed with simplicity of management and ease of use in mind, it offers enterprise-class features and capabilities for small and medium organizations, without the cost and complexity of large IT systems.
|Power||100-240V AC Universal|
|Dimensions (L x W x H)||440 x 262 x 43 mm|
|Weight||3.6 kg (7.9 pounds)|
|Operating temperature||32° to 113° F (0° C to 45° C)|
|Storage temperature||4° to 150°F (-20° to 70° C)|
|Working at relative humidity||- Minimum value 10%.
- Maximum 90%
|Storage in terms of humidity||- At least 5 %.
- Maximum 95%
|MTBF||- WC7500 (@25C): 664.072 hours.
- Fan tray (@25C): 676,058 hours.
- Power supply (@25C): 938,490 hours.
|Energy consumption||- Maximum: 13W|
|Compatibility||ENGR 10049 EST Environmental Stress Test Guidelines EST
ENGR 10045 EVT Engineering Validation Test Guideline
ENGR 10048 CVT Compliance Validation Test Guideline
ENGR 10046 Guidance on SVT System Validation Tests for SVT System Validation
ENGR 10023 HALT Guidelines for high acceleration in-service testing
ENGR 10036 CDG Component De-rating Guidelines for CDG Component
|Managed AP||- 15 per controller|
|WLANs (BSSID)||- 144|
|Parallel stations||- 2,000 per controller|
|Profile groups||- 9 (1 basic + 8 advanced)|
|Profile per controller||- 128|
|Features||- Layer 2
- Layer 3
- L2 Roaming
- L3 Roaming
- Insulation of layer 2
- Access list
- Automatic channel assignment
- Radius, AD and LDAP proxy
- Remote access point
- Balancing the customer load
- Bandwidth control
- Access point inwall ac
- Automatic power supply control
- Coverage Hole Detection
- Rate Restriction for each SSID
- 80211ac wireless access
- Rate Limit per customer
- 802.11e WMM
- AP on/off schedule
- Captive Portals
- Heat map
|Additional technical data||entry level wls controller 15ap
netgear wc750010000s entry level wls
80211ac wireless access
|Interfaces and indicators|
|RJ-45 Ports||- 4x10/100/1000 Mbps with automatic detection|
|USB ports||- One USB 2.0 type A connector|
|Console||- One D-Sub-9 connector 1|
|LED||- Power supply, status, fan, stacking - Master|
|VLANs||- 64+1 Mgmt
- # of VLANs
|Configuration||- Network user interface
|AAA||- Radius (primary and secondary)|
|AP Provisioning||- L2
|Wireless network security standards||- WPA
- MAC address
|Access control||- L2|
|Supported AP||- WAC730
- WNDAP380R - (selected region only)
1.For WAC720/730, fixed disconnection/AP suspension problems.
2.Fixed bug for LDAP authentication in Windows 10.
3.Fixed the monitor page showing improper channel usage.
4.Fixed a WAC720/730/740 restart bug.
5.Fixed iOS 12 communication bug with internal RADIUS server.
6.Fixed manual input of MAC ACL in local browser interface.