The default IP address of the print server is 192.168.0.10
. Before starting the configuration, check the IP address of the router. This is usually the gateway address of your computer.
In this guide, the IP address of the router is taken as the IP address: 192.168.1.1. If the router's IP address is in the range 192.168.0.x (where x: 1~254), go to Step 4
. Step 1
Connect the computer with the MAC system installed directly to the print server with a network cable. On a computer with MAC installed, click the Apple icon and then System Preferences.Step 2
Select the Ethernet option, select Configure IPv4 - Manually from the drop-down list, and then enter the IP address and subnet mask parameters as below. Press Apply.Step 3
Open your Safari browser, type http://192.168.0.10 in the address field. Select Setup -> TCP/IP. Change the IP address to the following: 192.168.1.10, and then press Save & Restart.Step 4
Connect the printer to the print server and then the print server to the LAN port of the router. Connect a computer with MAC system installed to the router (wired or wireless).
Select the Apple icon, and then System Preferences-> Internet & Wireless-> Network again. Select Ethernet; from the Configure IPv4 drop-down list, select Using DHCP. Then press Apply.Step 5
Select the Apple icon and then System Preferences ->Hardware ->Print & Fax.
To add a printer, select the "+" button in a new window.Step 6
In the top bar, select the IP icon and make the following settings:Ø Protocol: Line Printer Daemon - LPD
Ø Address: 192.168.1.10 (Print server IP address)
Ø Queue: lp1
Then select the printer driver and press the Add button to complete the installation process.
If the correct printer driver cannot be found, you can select Generic PostScript Printer / Generic PCL Laser Printer or Auto Select.
The new printer is displayed in a frame. To make the printer work as a default device, select 192.168.1.10 as 'default'.