TL-SG1008MP is a Gigabit desktop network switch with eight PoE+ ports and rack mount capability. Power and data transmission is via Ethernet cable. The device guarantees easy expansion of the wired network. With a total power budget of 126 W, with 30 W per port, the TL-SG1008MP can supply power to devices requiring high power consumption, such as access points, cameras or IP phones. The switch's operation is based on innovative technologies, saving up to 75% energy and making it an environmentally friendly solution that is ideal for use in both home and office networks.
Power over Ethernet
The 8 ports of the TL-SG1008MP switch support PoE+, which enables automatic detection and power supply of IEEE 802.3af/at compliant devices. This allows you to extend the range of your wired network wherever there is no access to sockets or power cords and there is a need to place access points, cameras or IP phones.
No more overloads
The port priority function protects the system in moments of overload. When the power consumption of devices powered by PoE+ is greater than or equal to 126 W, devices connected to lower-priority ports are automatically disconnected from power.
Easy to operate
The TL-SG1008MP is easy to install and operate, requires no configuration or complicated installation. Ergonomic, compact design, high quality of transmission and a wide range of offered functions make this switch a great solution for home or office network expansion.
8 RJ45 ports 10/100/1000 Mb/s Automatic negotiation of connection speeds and automatic crossover (Auto-MDI/MDIX)
10 BASE-T: Cat 3, 4 or 5 UTP cable (up to 100 m) STP EIA/TIA-568 cable 100 Ω (up to 100 m) 100 BASE-TX: Cat 5 or 5e UTP cable (up to 100 m) STP EIA/TIA-568 cable 100 Ω (up to 100 m) 1000 BASE-TX: UTP cable cat 5, 5e, 6 or higher (up to 100 m) STP EIA/TIA-568 cable 100 Ω (up to 100 m)
100-240 V AC, 50/60 Hz
PoE+ ports (RJ45)
Compliance with standard 802.3at/af 8 PoE+ ports Power supply: 126 W
MAC address plate
Dimensions (S x G x W)
294 mm x 180 mm x 44 mm (11,6″ x 7,1″ x 1,7″)
Installation in a rack
Max. energy consumption
9.89 W (220 V/50 Hz without a connected PD) 140.67 W (110 V/60 Hz with PD 126 W connected)
Compatible with IEEE 802.3af/at IEEE 802.3af/at PoE (PD) powered devices Prioritisation of ports Automatic MAC address saving and blanking Flow control EEE802.3x for full duplex mode and Backpressure for half duplex mode
Method of transmission
FCC, CE, RoHS
TL-SG1008MP Power supply cable Installation instructions Rack mount kit Rubber feet