The EdgePoint EP-R8 Gigabit router features FiberProtect, which significantly eliminates damage from electrostatic discharge (ESD) and reduces electromagnetic interference (EMI) and significantly improves the data signal quality for long-distance connections.
This single, compact device helps effectively avoid clutter from tangled cables. There is no need to buy expensive cabinets or expensive maintenance. The EdgePoint enclosure is resistant to harsh weather conditions, including wind, rain and snow. The included cover allows you to additionally protect your cables.
Powered by 54 V DC or via PoE, the EP-R8 is capable of powering 54 V or 24 V via PoE, all Ubiquiti devices, including the airFiber and airMAX series.
The EdgePoint Gigabit router provides a graphical interface designed for convenience of use and configuration. Access through your network port and website. Intuitive device management is done through a virtual port view that displays physical connectivity, speed and status.
The CLI provides fast and flexible command line configuration and has a settings management and monitoring of all advanced features. It also includes direct access to standard Linux tools and shell commands and access to CLI via SSH, Telnet..
|Basic technical parameters|
|Serial Console Port||(1) RJ45 Serial Port|
|PoE input port||(1) RJ45 Port|
|Ethernet ports||(6) 10/100/1000 RJ45 Ports
(2) 10/100/1000 RJ45/SFP Combination Ports
|Dimensions||326.6 × 382.7 × 88.8 mm (12.86 × 15.07 × 3.50")|
|Dimensions with wall bracket||326.6 × 382.7 × 105.5 mm (12.86 × 15.07 × 4.15")|
|Max. energy consumption||40W (Without PoE outputs)|
|Power inputs||(1) DC Terminal Block
(2) RJ45 (PoE In and eth0)
|Power supply||Min. 54 V / 0.8 A|
|Input voltage||54 V DC, 6A|
|PoE entrance||(2) 54 V / 1.5A, 4-Pair (+1, 2, 4, 5; -3, 6, 7, 8) PassivePoE, eth0 and PoE In (PoE In is DC Only, No Data)|
|PoE output||(2) 54 V or 24 V / 1.4A, 4-Pair (+1, 2, 4, 5; -3, 6, 7, 8)Passive PoE, eth1 to eth2
(5) 24 V / 0.7A, 2-Pair (+4, 5; -7, 8) Passive PoE, eth3 to eth7
|Power monitoring||(1) DC Terminal Block, Input power
(2) RJ45, PoE In and eth0, Input power
|Supported voltage range||56 to 42 V DC|
|Processor||Dual-Core 600 MHz, MIPS64 with hardware accelerated packet processing|
|Memory RAM||2 GB DDR3-1600 FRAMES|
|Code Storage||4 GB|
|Certificates||CE, FCC, IC|
|Temperature during operation||-20 to 65° C (-4 to 149° F)|
Before activating 54 V or 24 V passive PoE, make sure the connected device supports PoE and has the voltage supplied.
1. Go to Actions > PoE for the interface you want to configure.
2. Configure PoE settings
For eth1-eth2, select Off, 24 V-4pair, or 54 V-4pair
For eth3-eth7, select Off or 24 V
Then click Save.