The LiteBeam 5AC Gen 2 directs the radio energy in a narrow beam band. When the focal length is set in one direction, the LiteBeam 5AC Gen 2 will block or free-filter the noise, so interference immunity is improved. This feature is of particular importance in areas filled with other radio signals.
LiteBeam® AC connects to a separate Wi-Fi for quick and easy configuration with a mobile device.
LiteBeam® AC has increased protection against electrostatic discharge and also provides a more robust mounting with separate azimuth and height adjustment.
airOS 8 offers advanced features including airMAX, ac protocol support, real-time RF analysis and a completely new design for enhanced functionality.
LiteBeam® AC can be freely set up in three axes, so installation takes place in seconds and no special tools are needed. Installation on a pole requires only one screw.
|Basic technical parameters|
|Dimensions||358 × 271,95 × 272,5 mm|
|Weight without assembly||800 g (1.76 lb)|
|Weight with assembly||980 g (2,16 lb)|
|Power supply||24 V, 0.3 A Gigabit PoE adapter (included)|
|Maximum energy consumption||7 W|
|Power supply method||Passive PoE (pairs 4, 5+; 7, 8 return)|
|Voltage range||24 V ± 10%|
|Network interface||(1) 10/100/1000 Ethernet port|
|CPU specification||MIPS 74Kc|
|Memory||64 MB DDR2|
|LEDs||Power supply, Ethernet|
|Channel size||PtP mode 10/20/30/40/50/60/80 MHz
PtMP mode 10/20/30/40 MHz
|Characteristics of the housing||Headlamp (SGCC 0.6T), plastic|
|Mounting kit||Pole mounting (supplied)|
|Wind load||275 N at 200 km/h|
|Wind survivability||200 km/h|
|ESD/EMP protection||± 24 kV contact/air|
|Operating temperature||-40° to 70°C|
|Working humidity||5% to 95%|
|Certificates||CE, FCC, IC|
|Frequency of operation (MHz)||5150 - 5875|
|Radio Frequency (MHz) management||2412 - 2472|
This method is available for 15 minutes immediately after powering up the device. If necessary, you can turn on the power supply of LiteBeam AC.
1 again. Download the UNMS application from the App Store (iOS) or
Google Play™ (Android).
2. Connect the Wi-Fi network to the LiteBeam AC device called: LBE-5AC-Gen2:
Note: make sure DHCP is enabled on your computer.Start the application.
3. Run the application.
4. Touch LiteBeam 5AC option on the connection screen.
5. Touch Connect on the login
6. Select your country and touch Done.
7. In the configuration section adjust the settings to your needs.
Dual Band frequency (2.4GHz, 5GHz)
Operating temperature -40° to 70°C