The device does not require any special tools for assembly, only a single stroke is required.
Ubiquiti's airMAX technology has been proven in millions of applications worldwide, demonstrating exceptional performance in outdoor environments. The TDMA airMAX protocol provides exceptional scalability, high throughput and low latency in unlicensed, multipoint networks.
Ubiquiti's versatile airOS technology enables a powerful multipoint external network. airOS provides features such as wireless network settings, bridge or routing configuration and network management services.
Ubiquiti NanoStationLoco M2 is equipped with a LAN port powered by PoE. The new design based on the existing concept, the PoE power supply, a very favorable isolation factor between polarizations and surge protection 15kV for the radio track are features that give it an advantage over other devices of this type. The product can work in modes: Station, StatiosWDS, Access Point.
airView software provides spectrum analysis in different views: waterfall, waveform and real time view. This allows you to identify jamming and plan the network to minimize it.
|Features / filters|
|LAN standard||Fast Ethernet 10/100Mb/s|
|Maximum wireless transmission speed||150 Mb/s|
|Number of LAN ports||1x 10/100BaseTX (RJ45)|
|Operating frequency||2.4 GHz|
|Antenna gain||Under 10dbi|
|Device type||Client device|
|Type of device power supply||Passive PoE|
|Basic technical parameters|
|Dimensions||161 × 31 × 80 mm|
|Power supply (PoE)||24 V, 0.5 A|
|Maximum power consumption||5,5 W|
|Power supply method||Passive PoE (pairs 4, 5+; 7, 8 return)|
|Operating frequency||2412-2462 MHz|
|Network interface||(1) 10/100 Ethernet port|
|CPU specification||Atheros MIPS 24Kc, 400 MHz|
|Memory||32 MB SDRAM, 8 MB Flash|
|Beam width||60° (H-pol) / 60° (V-pol) / 60° (height)|
|Installation||On the post (included)|
|Operating temperature||-30 to 75° C|
|Working humidity||5 to 95%|
|Wireless approvals||FCC Part 15.247, IC RS210, CE|
|Shocks and vibrations||ETSI300-019-1.4|
Press the port cover release button on the back of your NanoStation and slide the cover down.
2 Plug the Ethernet cable from the powered switch (24V) into the Ethernet jack of your NanoStation and replace the cover.
Stand mount option
Place the NanoStation in a rack and secure it with a clip strap. Align if necessary.
Wall mount option
Fix the wall bracket to the wall with two screws.
Attach the NanoStation to a wall mount.
Make sure that the host system is connected to your NanoStation via Ethernet.
2. configure the host system with the IP address in the 192.168.1.x subnet.
3 Start your web browser and enter https://192.168.1.20 in the address field. Press the Enter (PC) or Return (Mac) key.
When the login screen appears, enter "ubnt" as username and password, then select your country and language.
The use of the product requires consent to the provisions of the regulations. Click the Login button.