Thanks to its innovative, industrial design and advanced technology, Ubiquiti LTU Pro is a high-performance 5 GHz Point-to-MultiPoint (PtMP) subscriber station. Based on Ubiquiti's proprietary LTU technology, LTU Pro is not limited by standard 802.11 Wi-Fi technology. The device has an integrated high gain antenna, providing wide range and high performance. Flexibility of channel width (10/20/30/40/50 MHz) allows for independent configuration of TX and RX channel frequencies anywhere in the radio band, avoiding local interference.
LTU-Pro's customized silicon-radio architecture provides up to 600+ Mb/1 of actual TCP/IP throughput and modulation rates up to 4096QAM2. In addition, LTU Pro supports NAT router modes to suit your specific deployment.
To manage your LTU Pro device, you have two options: the LTU configuration interface and Ubiquiti network management system. (UNMS™). Each of these options allows for manual configuration. The integrated GPS improves synchronization and allows observation of the device map.
|Dimensions||316.5 x 316.5 x 174.3 mm
(12.46 x 12.46 x 6.86")
|Weight||1.3 kg (2.87 lb)|
|Network Interfaces||(1) 10/100/1000 Ethernet Port
|Case||External UV-stabilised plastic|
|Maximum energy consumption||9W|
|Power supply||24V, 0.5A Gigabit PoE Adapter (included)|
|Power supply method||24V Passive PoE (Pairs 4, 5+; 7, 8-)|
|Installation||Pole mounting (mounting tools included)|
|Wind resistance||150 N @ 200 km/h (33.72 lbf @ 125 mph)|
|ESD/EMP protection||± 24kV Contact/Air|
|Operating temperature||-5 to 40° C (23 to 104° F)|
|Moisture||10 - 90%|
|Certificates||CE, FCC, IC|
Frequency of operation: 5 GHz
Operating temperature: -5 to 40° C (23 to 104° F)
LAN standard: Gigabit Ethernet 10/100/1000 Mbps