Ubiquiti UF-GP-C+ is a single-mode GPON cartridge dedicated for Ubiquiti OLT terminals. The SFP GPON optical module transmits data using single-mode fibers over a distance of up to 20 km. Wavelengths are 1310 nm and 1490 nm and the optical power range is 3 to 7 dBm. SFP UF-GP-C+ inserts are equipped with SC/UPC connectors. Data is sent at 1.25 Gb/s and downloaded at 2.5 Gb/s.
|Basic technical parameters|
|Type of module||SFP|
|Type of transmission||Single-Mode|
|Type of connector||SC/UPC|
|Wavelength||Tx: 1490 nm
Rx: 1310 nm
|Power range||Tx: 3~7 dBm
Rx: -30~-12 dBm
|Capacity||Downstream: 2.5 Gbps
Upstream: 1.25 Gbps
|Maximum cable length||20 km|
SFP UF-GP-C+ optical module is an insert dedicated for Ubiquiti OLT devices, including Passive UF-OLT GPON fiber optic terminal.
The SFP RJ45 module allows you to connect Ethernet cables to the SFP sockets of your network devices via a special insert, which is equipped with an RJ45 port.
Check if the ports on the device are SFP or SFP+ ports. The latter can operate at 10 Gbps. Then select the fiber optic cable. Single mode fiber is usually used for longer distances, while multimode fiber is used for shorter distances.