SINUS PRO UPS 2000W 24V 20A | Power supply | 2000W
USA (US) / GBP / Prices without VAT
SINUS PRO UPS 2000W 24V 20A | Power supply | 2000W

SINUS PRO UPS 2000W 24V 20A | Power supply | 2000W

CODE: VOLT SINUS PRO UPS 2000W 24V / EAN: 5903111886387
111,45 GBP without VAT
Added to cart
local_shipping SHIPPING: 24h
Battery voltage in UPS: 24V
UPS power (VA): 2000
UPS - charging current: 20A


SINUS PRO-2000W 24V emergency power supply unit

VOLT SINUS PRO UPS 2000W is a computer emergency power supply from the SINUS PRO series, the device combines high-performance pure sine wave DC/AC converters. In case of voltage loss from 230V mains or photovoltaic, the device switches to battery mode, which allows for further operation of the system and protection against irretrievable data loss.

upset diagram

The feature that distinguishes sine fault power supplies from cluster simple AC/DC converters is output voltage generation of a pure sine waveform, identical to that in the power network. The device includes DC/AC pure sine wave, UPS emergency switch, mains voltage stabiliser (AVR), battery charger (charger) and the necessary protection for the operation of the device together with the solar controller and photovoltaic. Thanks to the use of a colour display, the device allows you to monitor the most important operating parameters of the system. The power supply is from a series of emergency power supplies type "line-interactive".


Device characteristics

  • The functions of DC/AC converter, UPS emergency power supply are included in one device and
    automatic battery charger
  • The toroidal transformer used in the inverter provides high efficiency and low idling current.
  • The device is much more energy efficient than older constructions using transformers with
    with E-cores
  • A fast 32-bit microprocessor ensures accurate and trouble-free operation
  • Intuitive and easy to use thanks to the colour LED display, which informs about the current status
    operation of the device (input and output voltage, battery status, charging, etc.)
  • The converter produces pure sine wave voltage at the output, which makes it possible to work with practically
    any kind of load
  • High-currentcharge of batteries (exact values in the table with technical specifications)
  • Ability to change the charging current with a button and switch off the charger
  • Speed switchover from mains to UPS mode for uninterrupted operation
    connected devices
  • Intelligent cooling fan control, depending on the actual device temperature and
    operating status of the inverter
  • Ac (mains) / SOLAR (battery)
priority switch

Display elements and symbols



Features / filters
Battery voltage in UPS 24V
UPS power (VA) 2000
UPS - charging current 20A

Technical data
Rated power (continuous) 1400 W

Overload power (momentary) 2000 VA

Battery voltage / -ów 24 V

Rectifier (charging current) 20 A

PV charging voltage ~ 36V 24 - 50 V

Solar controller None

Automatic mains voltage regulator - AVR 140 - 275 VAC

Idle current (no load) 0,3 A ≤ Idle current ≤ 1,5 A

Permissible supply voltage range Switching to battery power is done when the mains voltage is lower than 160 V (+- 5 V) or higher than 260 V (+- 5 V)

Supply voltage frequency 45 Hz ~ 65 Hz

UPS output voltage frequency 50 Hz (+- 0.5 Hz)

Output voltage range AVR mains voltage regulator: 204 - 240 V, UPS - battery: 230 V (+- 3%)

Overload protection (battery power supply) In the event of an overload of 110 % - 130 %, the power supply is disconnected after 30 seconds. If the overload is more than 130 %, the power supply shall be cut off immediately.

Overload protection (mains supply) The device warns of overload until the fuses are tripped.

Permissible humidity 10 % RH ~ 90 % RH

Permissible operating temperature 0 ~ 40 °C

Dimensions 310 mm x 170 mm x 330 mm

Weight 14 kg




What are SINUS PRO inverters designed for?

SINUS PRO series converters are designed for office and home applications, they should not be used together with special equipment, the failure of which could cause material damage or threaten life (e.g. industrial and medical equipment).

Can the device be overloaded?

Do not overload the device. Operation under load greater than shift load may damage the inverter.

Choose a different country or region to shop in the language that suits you
Our site uses cookies (so-called "cookies"). You can find more about these files, as well as about how we process your personal data, in our privacy policy.