The Mi True Wireless Earbuds Basic headphones guarantee a perfect music experience without the problem of tangling cables The large battery provides 4 hours of operation and thanks to the practical charging case you can enjoy your favourite music for up to 12 hours. Convenient touch control allows quick access to music management and incoming calls.
Operating the presented earphones does not require any special skills. All you have to do is take both earphones out of the et and charge, and they will turn on and pair automatically.
Redmi Airdots are equipped with the latest Bluetooth 5.0 and the data transfer rate has been almost doubled. The Bluetooth connection does not interrupt the connection with the smartphone when walking down the street, you put the phone in your pocket.
The larger the size of the transducer, the better the low frequency reproduction. The Mi True Wireless Earbuds Basic headphones are equipped with a 7.2 mm diaphragm, which ensures perfect reproduction of the full sound band. Music fans will appreciate the lag-free performance and great sound with deep, low bass. The compact chassis hides an intelligent DSP noise reduction technology, making every connection perfect.
You don't have to worry about the headphones falling out of your ears. 3 different sizes of earmolds will help you fit the ideal size for your ears, ensuring your comfort. The headphones hold on securely, even while running or training. 3 pairs of different sizes of earplugs also guarantee perfect isolation of ambient sounds, so nothing will interfere with the enjoyment of your favourite music.
When fully charged using the charging case, the earphones provide 4 hours of music playback. They can be recharged 3 times in a row, so the total playback time will increase even up to 15 hours. Use the headphones all day long without worrying about the battery level.
Touch to answer an incoming call and touch again when you want to end.
Please hold for 1 s to reject the incoming call.
In the standby mode, tap the multifunction button to start or pause the music.
|Features / filters|
|Device type||Bluetooth headphones|
|Basic technical parameters|
|Type of product||Wireless headphones|
Automatic switching on and pairing
Automatic shutdown after 5 minutes of inactivity
Displaying the battery status from the smartphone
|Reach||Up to 10 m|
|Battery capacity||Single handset: 40 mAh
Package: 300 mAh
|Battery life||Up to 4 h
Up to 150 h (on standby)
|Charging time||Headphones: up to 1.5 h
Packaging: up to 2 h
|Dimensions||Single handset: 26.65 mm × 16.4 mm × 21.6 mm
Packaging: 62 mm × 40 mm × 27,2 mm
|Weight||4.1 g (single handset)
43.6 g with packaging
|Protection class||Headphones: IPX4|
|Additional information||Safe and comfortable fit
Portable and wireless design
3 pairs of silicone earplugs (S, M, L)
|Instructions for use (EN)||Download|
When the Xiaomi Redmi Airdots is charging, the indicator light is lit up red. When the battery is fully charged, the light turns white and then goes out after 1 minute.
No, AirDots don't have that feature.
No, because Bluetooth headphones and wristbands belong to the same receiving device, so they cannot be connected to each other.
If the headphones are outside the charging box and do not perform any operation, they will turn off automatically after about 5 minutes.
If the earbuds cannot be properly connected, the following steps should be taken to reset:
1. remove the earplugs from the charger and make sure they are off.
Press and hold the touch button on both inserts for approximately 15 seconds. The indicator will flash three times, alternating red and white.
3. release the panel and place the earmuffs back in the charger.
4. remove the earplugs from the list of paired devices and then pair them with your device.
The installed earplugs are of size M. They can be changed to size S or L if size M does not fit your ear.
Note: using earbuds can reduce the perception of external sounds. Do not use earplugs in areas where your safety is at risk. It is recommended to use only one earmould on the outside.
Gently insert the earmold into your ear canal, make sure it does not move when shaking your head. Adjust the earmold so that it does not obstruct the microphone during conversation. Point the earmold microphone towards your mouth so that the conversation is clear.
Before using the device, it must be recharged and for this purpose the protective film must be torn off from the contact points of the earmuffs. Use a USB cable to charge the case.
Status Charger LEDs:
- low battery: the charger indicator flashes red every 3 seconds;
- discharged: place the earpiece in the charger, the earpiece indicator turns red in 10 seconds;
- Charged: the charger indicator is white and goes out when the charger is unplugged.
When the battery level of the earbuds is low, you will hear a voice message. Place the ear pads in the charger, the indicator light is red when charging and turns white when fully charged and then goes out after 1 minute.
Automatic connection: Remove both inserts from the charger at the same time and wait 2-3 seconds until the inserts are automatically switched on. When the indicator on the right insert blinks white slowly, you can search for "Mi True Wireless Earbuds_R" in the Bluetooth settings of your device. If you cannot pair the earbuds, put them back in the case and repeat the previous steps.
Manual connection:After the earplugs are turned off, the earplugs must be turned on manually. Both indicators flash white and the connection between the earmolds has been established. Turn on the Bluetooth function of the device and connect the device with headphones.
Automatic connection: Remove one earpiece from the charger and wait for the earpiece to turn on automatically. The earpiece indicator flashes quickly white first and then slowly. Turn on Bluetooth in your device, search for Mi True Wireless Earbuds_R or Mi True Wireless Earbuds_L earplugs and then pair them together.
Manual connection:After the earplugs are turned off, turn on one of the earplugs manually. When the indicator blinks white slowly, turn on the device's Bluetooth function and pair the earmold with the device.
1) Fully charge the headphones before first use.
2. if the product is not used for more than 2 weeks, it is recommended that
charge the battery before use.
Use only certified chargers.
The pairing function will be turned off if the earplugs are not used for a long time. Please reinstate the earplugs.
pair with the device.
Under no circumstances should the product be disassembled, repaired or modified as it may be damaged.
or cause a fire.
Do not expose the product to the environment or to temperatures below 0°C or above 45°C.
3. keep the LED indicator out of the eyes of children and animals during use.
4. Do not use headphones during a lightning storm.
5) Do not clean the product with alcohol or other cleaning agents.
6) Avoid contact with liquids.
CAUTION: Excessive sound pressure from earbuds can cause hearing damage.