The F600 ONU terminal is designed to use FTTH. F600 provides stable IPTV support and fast Internet access, but presents itself compactly and has energy-saving advantages.
By using QoS in F600, it has become possible to make smooth operation of services that require increased network capacity for multiple users at the same time.
The interaction of GPON and XG-PON1 technologies has become possible thanks to the WBF (Wavelength Block Filter) in a single network, which provides the future ability to improve it with the F600 terminal.
Support for remote update (OMCI) via batch, loop detection and route checking will make the F600 terminal work in plug-and-play mode, without the need for additional configuration.
The GPON optical interface will enable fast access to the broadband Internet, while the Gigabit Ethernet and Fast Ethernet ports will allow the network to be separated into subsequent devices through a stable wired connection.
ZTE F600 will also help you save energy by detecting network traffic and if it is reduced it will go into low power mode.
|Optical port||1 x GPON interface (SC / APC)|
|Transmission range||0-20 km|
|Transmission speed||Download: 2,488 Gb/s
Transmission: 1,244 Gb/s
|LAN interface||4 x Interface 10/100/1000Base-T, Half/full duplex mode, Automatic MDI/MDIX, Automatic negotiation|
|Wavelength||Download: 1480-1500 nm
Transmission: 1290-1330 nm
|Sensitivity of signal reception||-28 dBm|
|Optical output power||0.5-5 dBm|
|Energy consumption||Up to 6W|
|Dimensions||180 x 38 x 127 mm|
|Working conditions||Temperature: 0°C to 40°C
Humidity: 5% to 95%
|Power supply||12 V DC|
|Installation||On the desk / On the wall|
|Spare battery||3 AH / 6 AH (optional)|
|GPON||8 x T-CONT
32 x GEM port
|MAC address plate||1k|
|Multicast||IGMP v1/v2 Snooping|
|Multicast group per user port||256|
|QoS||Classification of service flows based on physical port
Restriction of incoming data
Gigabit Ethernet is a data rate standard that is supported by two gigabit Ethernet ports on the F600 GPON and can be 1000 Mb/s (1 Gb/s).
In the F600 device 2 RJ-45 connectors are standard Gigabit Ethernet, while another 2 operate at Fast Ethernet speed.