EN
The Armac 650E/LED/V2 UPS from the Home line was designed to meet the basic power autonomy requirements of home users using uninterruptible power supplies. The manufacturer has ensured high quality workmanship already at the production stage, which translates into the overall safety and reliability of this unit. The lack of communication connectors does not pose a problem for its functioning as an uninterruptible power supply for home electronics equipment.
A dedicated processor is responsible for the proper functioning of the UPS, which monitors the parameters of the unit, its stable operation and the power supply to connected devices. The technology used in the UPS also allows automatic charging of batteries in Stand-By mode and automatic switching on when the mains power returns.
Armac UPS from the Home Lite line is the assurance of comprehensive protection for your electronic equipment. The solution not only guarantees reliability, but also provides comfort and peace of mind. With advanced features, the UPS provides protection against overload, short circuit, extreme temperatures inside the UPS and low/high battery voltage. You can trust the Armac brand and enjoy safety even during a sudden power failure.
For those who value peace and quiet, the noise made by devices signaling changes in their operation is undesirable. In the case of UPSs, battery mode operation often involves regular signaling sounds, which can be a nuisance, especially when the UPS is placed near a TV, computer or desk. Armac cares about the comfort of its users, which is why all UPS models have a feature of quiet operation in battery mode. This feature meets the expectations of even the most demanding users, who prefer quiet operation of the device regardless of its mode of operation.
For even greater protection of a variety of equipment from surges, the Armac UPS is equipped on the back with 2 RJ-11 / RJ-45 ports specifically for telephone lines and data communication cables. In the event of surges or sudden changes in network voltage, the UPS automatically identifies and corrects them, ensuring that a safe signal always reaches telephone and network equipment.
Technical data | |
UPS topology | Line-interactive (VI) |
Power | 390W |
Apparent power | 650 VA |
Device efficiency | 96% |
Number of outlets | 2 |
Socket type | Type E |
Number of batteries | 1 |
Connectors | USB 2.0 Type-B, RJ-45, RJ-11 |
Battery capacity | 7 Ah |
Battery type | Lead acid VRLA AGM |
Battery voltage | 12 V |
Battery charging time | 6 h |
Hold time at 50% load | 6.2 min |
Hold time at 100% load | 0.15 min |
Features | Automatic voltage regulation (AVR) |
Input voltage | 230 V |
Input voltage range | 145 - 290 V |
Input frequency range | 45 - 65 Hz |
Output voltage | 230 V |
Output voltage range | 195 - 255 V |
Output frequency | 50 Hz |
Automatic voltage regulation (AVR) | Yes |
Wave form (during battery operation) | Modified sine wave |
Transfer time | 2 - 6 ms |
Maximum switching time | 6 ms |
Operation signaling | LED |
Sound alarms | Yes |
Cold start | Yes |
Security | Anti-short-circuit, Overload |
Noise level | 40 dB |
Colour | Black |
Software | Not |
Supported operating systems | Windows 8, Windows 7, Windows 11, Windows 10, Linux, FreeBSD |
Recommended ambient temperature | 0 - 45 °C |
Recommended ambient humidity | 10 - 90 % |
Leakage class | IP20 |
Dimensions | Length 283 mm Width 95 mm Height 140 mm |
Weight | 4.2 kg |
Battery weight | 2.05 kg |
Accessories included | User Manual |