The Armac R5 surge power strip is an accessory that protects electrical equipment from mains surges or power failures. The device helps smooth out mains interference, providing stable power to equipment, as well as reducing high frequency interference from the electrical equipment itself. It is installed as a buffer between the equipment and the connection socket.
TheArmac R5 power strip has been designed to connect up to five euro standard sockets. The maximum load of the device is 2500 W. The filter is equipped with an on/off switch that automatically switches off the filter when the load exceeds the permissible limit. The casing is made of fire-resistant material, so that the device is not exposed to short-term fluctuations in load.
|Basic general data|
|Number of sockets||5|
|Cable lengths||3 m|
|Rated voltage Un||~250V|
|Rated current / Maximum load ∑In||10A (2500W)|
|Energy absorption (total)||155J|
|Maximum discharge current Imax||6kA - 8/20 µs|
|Permanently operating voltage Uc||250V 50Hz|
|Voltage protection level Up||≤1,2kV|
|Test voltage Uoc||4kV|
|Fuses||Automatic fuse 10A/250V|
|Shock protection system||Protective pins of sockets connected to the protective conductor|
|Plug||PN-E-93203 type 2P grounding|
|Net weight without cable||250 g|