EN
Aruba 's compatible J9150D SFP trans ceiver supports links up to 400 m using an OM4 MMF connector (300 m with an OM3 MMF) via an LC duplex connector. Digital diagnostic monitoring is available via a 2-wire serial interface in accordance with SFF-8472. Each SFP transceiver module is individually tested for use in HPE switches, routers, servers, network interface cards (NICs), etc. With low power consumption and high speed, this 10G SFP transceiver is ideal for data centers, enterprise cabling, service provider transport applications, radio and baseband units, etc.
The Aruba J9150D 10G SFP LC SR 300m MMF XCVR transceiver can be used with some Aruba switches. Compatible with Aruba 2540 48, 2920, 2930M 24, 2930M 40, 2930M 48, 3800, 8320 Single-mode cable device providing data rates up to 10 gigabits.
Basic general data | |
Produccent | Aruba |
Model | J9150D |
Forming agent | SFP |
Max. data rate | 10.3125 Gbps |
Wavelength | 850nm |
Maximum cable distance | 300m @ OM3 / 400m @ OM4 |
Connector | LC Duplex |
Media | MMF |
Transmitter type | VCSEL |
Receiver type | PIN |
DDM/DOM | Serving |
Commercial Temperature range | 0 to 70°C (32 to 158°F) |
TX power | -7.3~-1dBm |
Receiver sensitivity | < -11.1dBm |
Typical power consumption | ≤0.6W |
Receiver overload | 0.5dBm |
Bit Error Ratio (BER) | 1E-12 |
Extinction coefficient | >3dB |
EMC (Electro Magnetic Compatibility) | Supported |
MTBF | 1,000,000 hours |
Protocols | IEEE 802.3ae, SFF-8472, SFF-8431, SFF-8432, SFP MSA Compliant, CPRI, eCPRI |
The Aruba J9150D SFP is guaranteed to work correctly and securely only with Aruba and HPE devices.