BDCOM P3310D | OLT | EPON, 4GE


OLTP3310D is an OLT device with four PON ports (one external 10/100 one console port four fixed PON ports (in addition to the OLT SFP module) two optical Gigabit SFP ports two Gigabit combo ports two electrical Gigabit ports, 90-264V AC power supply, 19" rack mount enclosure and power supply).
The BDCOM P3310 OLT can support symmetric PON transmission at 1.25 Gbps, making efficient use of bandwidth and Internet services, enabling providers to deliver reliable services to their customers. The 1:64 link ratio devices with support for various hybrid ONU networks, significantly reducing transport costs.
Features / filters | |
PON standard | EPON |
Networking standards | IEEE 802.3ah |
OLT - Number of PON ports | 4 |
OLT - Number of Uplink ports | 4 |
Type of case | Rack (1U) |
Basic technical data | |
Manufacturer | BDCOM |
Model | P3310D |
Type | EPON OLT |
Service interface | |
PON ports | 4 |
GE link | 2 GE TX ports 2 GE SFP ports 2 GE SFP/TX combo ports |
Supported GPON SFP module | PX20, PX20 , PX20 |
Management interface | |
RJ45 console | 1 |
Mini-USB console | 1 |
Out-of-Band | 1 |
System capacity | |
DRAM | 128 MB |
Flash memory | 32 MB |
Backplane | 20 Gbps |
MAC table | 8 K |
Buffer size | 512 MB |
Jumbo frame | 2 KB |
Active VLAN | 4094 |
Total SVI | 1 |
Redirection mode | Saving and forwarding |
Credibility | |
MTBF | 100000 h |
Certification | CE, FCC, ROHS |
Technical specifications | |
Standards | IEEE802.3ah YD-T 1475-2006 access network requires EPON base YD-T 1771-2008 access network requires EPON interworking China Telecom EPON standard CTC2.1/3.0 Ethernet - II |
Multicast | Multicast L2 IGMP snooping MLD snoop Fast-leave |
VLAN | VLAN based on port/IP/protocol/MAC 4K VLAN QinQ and flexible QinQ |
QoS | Backward Flow Control (Half Duplex) IEEE 802.3x flow control (full duplex) IEEE 802.1p, CoS WRR, SP and FIFO Queue scheduling Uplink/downlink rate limiting on a per ONU basis DBA and SLA |
Reliability | Unidirectional link detection (UDLD) EPON optical module hot swap EPON optical path protection (type B/C, hand-in-hand) Detection of abnormal ONU luminescence, e.g. long luminescence IEEE 802.3ad LACP |
Network security | L2~4 ACL Flow-based ACL MAC restriction MAC sticky Port Isolation Packet Storm Control Transmission data encryption on PON interface Protection against DDOS attacks, TCP- SYN-flood, UDP-flood, ARP- flood, etc. |
Management | Various management modes such as CLI, Telnet, SSH, HTTP, SSL and SNMP ISSU FTP/TFTP Debugging output NTP |
Network availability | STP/RSTP/MSTP BPDU protection EAPS |
Power supply | |
AC | 90 ~ 264 V |
DC | 36~72 V |
Power sockets | 1 (fixed, optional 2) |
Max. consumption | 40 W |
Total BTU output power (Note: 1000 BTU/h = 293W) | 136.52 |
Cooling system | |
Number of fans | 2 |
Air flow | Left-right |
Noise at 25°C | < 45 dBA |
Appearance | |
Dimensions (WxDxH) | 442 mm x 315 mm x 44 mm |
Weight | 3.5 Kg |
Environmental specifications | |
Operating temperature | 0~45°C |
Operating humidity (non-condensing) | 10%~85% |
Storage temperature | -40°C-80°C |
Storage Humidity (non-condensing) | 5%-95% |
Data sheet | Download |