EN
Cambium Networks cnPilot e430H Enterprise class is an internal, wall mounted access point supporting beam forming compliant with 80211ac Wave 2 standard. It is ideal for hotels, resorts, multi-family buildings or any other indoor space that requires a wall-mounted access point with multiple Gigabit Ethernet ports to support internal, wireless Wi-Fi and wired access through guest portals.
The e430H model provides trouble-free support for a network of up to 2048 clients. Hotspot portal hosting at an access point or cnMaestro provides 'controller-less simplicity' to create a powerful network portal.
Wi-Fi monetization is provided by guest access features cnMaestro, which support welcome page hosting, social networking and payment gateway for wired and wireless clients. Built-in functions are available from the controller. These features, which allow you to create traffic profiles with limited time, bandwidth, capacity or vouchers for temporary guest access, make the e430H ideal for hotels, cafes, campsites and office guest Wi-Fi networks.
There is nothing more frustrating than a failed connection to an access point due to a WAN link failure. If a key element such as an external gateway or AAA is not connected, the e430H monitors the uplink Gigabit connector to detect a network failure. When a network failure is detected, the corresponding WLAN is disabled, allowing the client devices to be redirected to an adjacent access point.
Creating lattice networks from e430H access points or other indoor or outdoor Enterprise access points is a convenient way to extend the range of your Wi-Fi network without laying cabling.
The e430H combines high transmitting power and flexible control mechanisms, which allows you to regulate transmitting power in high density areas. Bandwidth management through Airtime Fairness, higher performance through AutoRF and higher speeds of client devices through bandwidth control allow the network to adapt to the dynamics of client profiles.
Features / filters | |
Maximum wireless transmission speed | 1300 Mb/s |
Number of LAN ports | 4x 10/100/1000BaseTX (RJ45) |
Operating frequency | Dual Band (2.4GHz, 5GHz) |
Wireless network standards | IEEE 802.11ac Wave 2 |
Antenna gain | Under 10dbi |
Antenna type | Integrated |
Application | Indoor |
MIMO Type | MU-MIMO 2x2 |
Type of device power supply | PoE 802.3af/at |
Access point specification | |
Standards | EEE 802.11a/b/g/n/ac Wave2 IEEE 802.11d/e/h/i/k/r/u/v/w Modulation: BPSK, QPSK, CCK, 16/64/256-QAM Radio modes: DSSS, OFDM |
Frequency bands | 2,400 to 2,2484 GHz 5,150 - 5,250 GHz 5,250 - 5,350 GHz 5,470 - 5,725 GHz 5,725 - 5,850 GHz |
MIMO, we're streaking | 2x2:2 MU-MIMO |
Channel width | 20 MHz, 40 MHz, 80 MHz |
Simultaneous customers | 256 |
Max. transmission speed | 2.4 GHz: 400 Mbps 5 GHz: 867 Mbps |
Transmission power range | 2.4 GHz: 23 dBm 5 GHz: 21 dBm |
Antenna | Omnidirectional, integrated |
Antenna gain | 2.4 GHz: 3.5 dBi 5 GHz: 4.9 dBi |
SSID | 16 |
Beamforming | Yes |
Bluetooth | Bluetooth 4 BLE radio, 3.3 dBi antenna |
Wi-Fi Alliance | Wi-Fi certified a, b, g, n, ac WPA2 - Enterprise, Personal WMM |
Radio functions | Maximum Ratio Combining (MRC) Cyclic Delay/Shift Diversity (CDD/CSD) support Space-Time Blocking Coding (STBC) Low-Density Parity Check (LDPC) Package aggregation: A-MPDU, A-MSDU |
Ethernet ports | Four MDIX Gigabit Ethernet auto-sensing (10/100/1000 Mb/s), one through port |
Power supply | 802.3af PoE power supply or 48 V DC PoE switch 802.3at or PoE+ if PoE-Out port is used |
Dimensions | 14.7 x 9.4 x 3.4 cm (5.7 x 3.7 x 1.3") |
Working humidity | 5% to 95%, non-condensing |
Weight | 390 g (0.86 lb) |
Operating temperature | 0°C to 45°C (32°F to 113°F) |
Power consumption | 9 W (typical) 25 W (maximum, with PoE-out) |
LED | Tri-colour LEDs controlled from the software |
Safe installation | Kensington Key Slot |
Reset button | Yes |
MTBF | 1.025.801 h at 50°C, 2.828.686 h at 25°C |
Certificates | FCC, CE, IC, UL, WEEE/RoHS compliance UL2043 (Plenum Rating) |
Wi-Fi features | |
Mounting options | Flush-mounted single bracket included. Available accessories: double bracket, wall bracket, desk stand |
Radio management | AutoRF automatic channel and power management |
Management modes | cnMaestro cloud management Self-contained local VM cnMaestro controller Autopilot (access point as controller) Standalone from Access Point GUI (http/https), CLI (telnet/ssh) |
Access for guests to the Captive Portal | cnMaestro Controller Portal Integration with external guest portals at the access point Built-in portal at the access point LDAP and RADIUS authentication Walled Garden function with DNS white list |
Speed limitation | Per-client, Per-WLAN static and dynamic rate limiting |
Customer isolation | At the access point, all over the network. |
Fast Roaming | 802.11r, Opportunistic Key Caching, Enhanced Roaming |
Airtime Management | Airtime Fairness, Band Steering, Band Balancing |
AAA support | Authentication, access control, dynamic Authorisation (CoA, DM) Server emergency switchover, load balancing |
QoS (Quality of Service) | 802.11e/WMM QoS, DSCP/ToS mapping |
Ethernet services (L2) | 802.1p/802.q, RADIUS assigned VLAN, VLAN per SSID, VLAN pooling, LLDP, IGMP Snooping (V1/V2/V3) |
Mesh | WDS Mesh unit and multistage |
Network services | NAT, DHCP server |
Wireless network security | WPA-TKIP, WPA2-AES, 802.11i WPA-PSK, WPA2-PSK, WPA2-Enterprise 802.1x authentication with different types of EAP (EAP-TLS, EAP-TTLS/MSCHAPv2, PEAPv0/EAP- MSCHAPv2, PEAPv1/EAP-GTC, EAP-SIM, EAP-AKA, EAP-AKA', EAP-FAST) Protected management frames (802.11w) |
Dynamic SSID service | By time/date, by monitored host |
MAC Authentication | Filtering list at the access point MAC filtering list in the controller RADIUS MAC Authentication Forwarding MAC authentication to the Captive Portal |
Access Control Lists (ACLs) | Layer 2 (L2), layer 3 (L3) and DNS |
3G/4G/LTE Offload | Passpoint (Hotspot 2.0) |
DHCP Relay | Supported, with option-82 adjustment |
NMS monitoring | SNMP v1, v2c, v3 |
Customer API | Customer presence/location API DNS, NAT and TCP Connecting Logging |
Time synchronization | Automatic (from controller), NTP |
Diagnostic tools | Packet Capture, Spectrum Analyzer, Ping, Traceroute, Syslogs |
Traffic tunnelling | L2TP, L2oGRE, PPPoE |
Based on feedback from our beta tests, we have improved various aspects of product design, including extending the temperature range of the AP to include greater resistance in a wider range of deployment scenarios.
The e430H is a full-featured 80211ac Wave 2 Wave in-room wall plate AP with built-in BLE (Bluetooth Low Energy) radio that can support up to 256 users in 16 SSID configuration. All e430W specifications refer to the e430H.
Yes, the Cambium e430H is equipped with a wall adapter with a single unit that allows the e430H to be mounted on a single wall socket.
No. They seem similar, but the bracket used in the CnPilot e430W is not compatible with the e430H.
The e430H is equipped with 4 Ethernet ports. GE1 is located on the back of the device and serves as a WAN interface. GE2, GE3, GE4 are located at the bottom of the AP. GE3 is a dual 8023af PSE port to connect Ethernet/PoE devices. There is one RF45 through port to connect an additional network cable between the rear of the AP and RF45 at the bottom. This port is usually used and the existing telecommunication outlet has two RJ45 ports. One port will connect to GE1 and the other to a pass-through RJ45.
Yes, the three-color LED can be switched on/off using the control software from cnMaestro.