Cambium CNPILOT XV2-2T 120° Outdoor | Access point | WiFi6, 802.11ax 2x2 5GHz, 1x RJ45 1000Mb/s, 1x RJ45 2500Mb/s


Cambium CNPILOT XV2-2T 120° Outdoor | Access point | WiFi6, 802.11ax 2x2 5GHz, 1x RJ45 1000Mb/s, 1x RJ45 2500Mb/s

850,72 EUR without VAT (net)
Out of stock
Maximum wireless transmission speed: 1750 Mb/s
Number of LAN ports: 1x [100/1000/2500M (RJ45)]
Operating frequency: 2.4 GHz5 GHz
Show more parameters
Recommended products
Subscribe to the NEWSLETTER and receive 5EUR* for shopping
* Offer valid for orders from 45EUR |Regulation|


New products



Outdoor Wi-Fi 6 designed for greater range and speed

The Cambium XV2-2T1 is a dual Wi-Fi 6 radio access point (AP) designed for outdoor deployments in Wi-Fi hotspots, outdoor corporate networks, hospitality and education. The XV2 2T features surge suppression up to 4kV and an LTE coexistence filter. Combining Wi-Fi 6 technology with high-performance antennas, the XV2-2T provides coverage of up to 1km, as well as higher throughput over shorter distances compared to competing solutions. By covering a larger area per access point, network operators can save on hardware, cabling, installation, maintenance and access rights costs for external Wi-Fi deployments. Combined with Cambium Networks' cnWave 60 GHz multi-gigabit solutions for Wi-Fi backhaul, network operators can cover large areas at incredible speeds - all wirelessly.


Key features of the Cambium CNPILOT XV2-2T1

  • Coverage of 1 km or more, allowing for a significant reduction in the equipment and cost required to cover an area
  • PoE output up to 30 W for external IP/Ethernet devices such as an IP camera, 60 GHz node or other Wi-Fi access point
  • All-in-one design with integrated antennas and controller function
  • Degree of protection IP67

PoE output for powering additional devices

The XV2-2T1 provides a Cambium 30VDC or 48VDC output for PoE devices connected to a second Gigabit Ethernet port. Ideal for connecting the XV2-2T0 to a Cambium Subscriber Module (SM), Terragraph CN (connection node), or any IP and Ethernet device such as a security IP camera or other Wi-Fi access point.

Support for IEEE 802.11ax standard

The new IEEE 802.11ax standard provides higher network speeds and enables more connected devices with higher packet quality. In outdoor deployments, IEEE 802.11ax provides greater range by increasing the RF frame preamble by 3 dB and improving signal quality with increased guard spacing compared to previous Wi-Fi technology. XV2-2T1 is fully backward-compatible with existing Wi-Fi technology and prepares the network for greater growth and higher density of connected Wi-Fi devices.


Manage in the cloud or locally

The XV2-2T1 continues the convergence of the enterprise network with an intelligent access point, managed by Cambium Networks' XMS or cnMaestro intelligent management system. Choose the management system that best suits your business and benefit from the latest technologies from Cambium Networks.


Cambium Networks XMS

Cambium Networks XMS uses intelligent access points with embedded edge controllers to deliver edge services at any network density. The XMS management plane is a cloud-oriented technology with a simple and easy-to-use interface providing L7 application policy-based control, EasyPass BYOD secure access and a drag-and-drop MSP dashboard.

Cambium Networks cnMaestro™

Cambium Networks cnMaestro™ uses a distributed intelligence architecture with cloud-based management and intelligent access points that self-optimize for the RF environment. cnMaestro provides management for Cambium's broadband fixed wireless switches, cnMatrix Ethernet switches, enterprise Wi-Fi access points and service provider home routers.


Features / filters
LAN standard Gigabit Ethernet 10/100/1000 Mb/s
Maximum wireless transmission speed 1750 Mb/s
Number of LAN ports 1x [100/1000/2500M (RJ45)]
Operating frequency 2.4 GHz, 5 GHz,
Wireless network standards IEEE 802.11ax, IEEE 802.11a, IEEE 802.11ac Wave 2, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n,
Antenna gain 11dBi - 20dBi
Antenna type Integrated
Application Outdoor
MIMO Type 2x2
Type of device power supply PoE 802.3af

Technical data
Wireless connectivity 5 GHz 802.11 a/n/ac Wave 2/ax, 2x2
2.4 GHz 802.11 b/g/n/ax, 2x2
BLE 4.1
Network security WPA3, WPA2 (CCMP, AES, 802.11i), WPA2 Enterprise (802.1x/EAP), WPA PSK (TKIP), WEP, Open
Maximum throughput 5 GHz - 1,201 Mbps
2.4 GHz - 573.5 Mbps
Interfaces 1 x IEEE 100/1000/2500 Mbps
1 x IEEE 10/100/1000 Mbps Ethernet with SW configurable passive PoE 30 V or 48 V up to 30 W output
Gain and type of antenna 5 GHz 13.5 dBi, Sector
2.4 GHz 11 dBi, Sector
Max EIRP 5 GHz 36 dBm
2.4 GHz 35 dBm
EIRP may be limited by national regulations
Power Max 20W
Up to 50W when powering an auxiliary device
Dimensions 582 mm x 200 mm x 80 mm
(22.91 in x 7.87 in x 3.15 in)
Weight 1200 g (2.64 lbs)
Additional security features Kensington lock slot
LED signaling Multi-color status LEDs
Ambient temperature during operation -40ºC to 65ºC
(-40ºF to 149ºF)
Storage temperature -40ºC to 70ºC
(-40ºF to 158ºF)
Moisture 95% RH non-condensing
MTBF 25ºC = 674,966 h
65ºC = 197,106 h
Assembly Pole or wall mounting
Pole diameter: MIN 30 mm / MAX 75 mm
Certification Wi-Fi Alliance 802.11 a/b/g/n/ac/ax, FCC, IC, CE, EN 60601-1-2, EN 60950-1,IEC 62368-1 Safety, EN 60601-1-2 Medical,
EN 61000-4-2/3/5 Immunity, EN 50121-1 Railway EMC, EN 50121-4 Railway Immunity, IEC 61373 Railway
Modes of operation Standalone
Managed by cnMaestro cloud or VM
XMS managed in the cloud
WLAN 512 clients, 16 SSIDs
WPA3 Enterprise, WPA-TKIP, WPA2 AES,
802.1x, 802.11w PMF
Authentication encryption 802.1x EAP-SIM/AKA, EAP-PEAP, EAP-TTLS, EAP-TLS MAC authentication to local database or external RADIUS
Scheduled WLAN On/off by day, week, time of day
Data limit Client bitrate/time/bandwidth limit per SSID
Subscriber QoS WMM
Fast roaming 802.11r, OKC, Enhanced roaming
Mesh Multi-hop, either band
Channel selection Multimodal channel selection with AutoChannel and AutoBand. Detailed control of off-channel scanning and channel selection
RF management Multi-modal RF optimization supporting AutoCell performed at smart access point.
Out-of-band RF spectrum analysis, RF network control with self-test, RF monitor with chn/noise/interference
Data rate trimming and minimum data rates
Network LACP (802.3ad), TCP connection log, NAT logging firewall, DHCP server, access control based on L2, L3 or DNS,
VLAN bonding, RADIUS VID attribute, VLAN per SSID per user
Band Steer Load Balance Yes
Tunnel L2TP, L2oGRE, PPPoE
Network and RF management tools Wired and wireless remote packet capture, automatic logging,
ZapD performance tool, false access point detection
Services NTP, Syslog, SNMP traps, DNS proxy
Wi-Fi protocols VHT MCS rates, 16/64/256/1024-QAM, 20/40/80 MHz.
TWT, Long OFDM Symbol, Transmit beamforming, Airtime Fairness, AMSDU, AMPDU, RIFS, STBC, LDPC, MIMO Power
IEEE 802.11 a/ac/ax/b/d/e/g/h/i/k/n/r/u/v
850,72 EUR without VAT (net)
Out of stock
Print version
Session will expire in:
You will be logged out after the session expires
Choose a different country or region to shop in the language that suits you
Our site uses cookies (so-called "cookies"). You can find more about these files, as well as about how we process your personal data, in our privacy policy.
You are on page for country / region:
English (EN)
Please select a different country or region to shop in a language that suits you.