EN

Cambium CNPILOT XV3-8 | Access point | WiFi6, SDR 802.11ax 8x8 or Dual 4x4 5GHz, 1x RJ45 1000Mb/s, 1x RJ45 5000Mb/s

CODE: XV3-8X00A00-EU

Cambium CNPILOT XV3-8 | Access point | WiFi6, SDR 802.11ax 8x8 or Dual 4x4 5GHz, 1x RJ45 1000Mb/s, 1x RJ45 5000Mb/s

CODE: XV3-8X00A00-EU
1470,65 GBP without VAT (net)
Operating frequency: 2.4 GHz,  5 GHz, 
Antenna gain: Under 10dbi
Show more parameters

About product

Cambium CNPILOT Access Point XV3-8

The Cambium XV3-8 is an enterprise-class WiFi access point providing up to 3466 Mbps throughput. It operates in 2.4 and 5 GHz bands and supports Wi-Fi 6/5 (802.11b/g/n/ac/ax), MU-MIMO 4x4, MU-OFDMA, TWT standards. Equipped with a dedicated 5 GHz radio module that performs proactive radio air monitoring and automatic switching to free WiFi channels, a BLE 4.1 module to integrate the access point into IoT infrastructure, a 5 Gbps RJ45 port with PoE 802.3bt/at support and a 1 Gbps RJ45 port. Capable of supporting up to 1024 clients.

XV3-8

Main advantages and features

  • High density Wi-Fi with software defined radios (SDR)
  • Architecture with five radio modules for operation at the technology edge
  • Total data rate 6 Gb/s
  • Dedicated scanning sensor, dual band
  • Application policy control
  • EasyPass with integration with Microsoft Azure and Google G Suite

Specification

Features / filters
Number of LAN ports 1x 10/100/1000BaseTX (RJ45), 1x [100/1000/2500/5000M (RJ45)],
Operating frequency 2.4 GHz, 5 GHz,
Wireless network standards IEEE 802.11ac Wave 2, IEEE 802.11ac, IEEE 802.11a, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.11ax,
Antenna gain Under 10dbi
Antenna type Integrated
Type of device power supply PoE 802.3bt, Power supply,

Access Point Specifications
Wi-Fi 802.11 a/b/g/n/ac Wave 2/ax
SSID security WPA3, WPA2 (CCMP, AES, 802.11i), WPA2 Enterprise (802.1x/EAP), WPA PSK (TKIP), Open
Maximum PHY speed 2.4 GHz: 1.147 Mbps
5 GHz: 4.804 Mbps
Ports 1 x IEEE 802.3 10/100/1000 Mbps
1 x IEEE 802.3bz 100/1000/2500/5000 Mbps
Auto sensing MDIX
1 x USB 3.0
Radios 2.4 GHz: 802.11 b/g/n/ax, 4x4
5 GHz: 802.11 a/n/ac Wave 2/ax, 8x8 (or configure as two 4x4) 2.4/5 GHz scan, 1x1 BLE 4.1
Antenna 2.4 GHz: 5 dBi
5 GHz: 6.7dBi
2.4/5 GHz: 5 dBi Sensor / 6.3 dBi BLE 5 dBi
Max. EIRP 2.4 GHz: 31 dBm
5 GHz: 36 dBm
Power supply Max. power from USB/BLE, 35 W (802.3bt)
802.3at mode with USB/BT disabled
12 VDC power supply, 2.1 mm (.083 in) barrel connector
Dimensions 235 mm x 235 mm x 42 mm
Weight 1,250 g
LEDs Multi-colored status LEDs
Operating temperature From 0ºC to 50ºC
Storage temperature From -20ºC to 70ºC
Operating humidity 95% RH non-condensing
Mounting options Wall or ceiling mounted, T-bar with attached locking bracket, ceiling tile
Certificates Wi-Fi Alliance 802.11 a/b/g/n/ac/ax, PP2.0, FCC, IC, CE, EN 60601-1-2, EN 60950-1, IEC 62368-1 Safety, EN 60601-1-2 Medical, EN 61000-4-2/3/5 Immunity, EN 50121-1 Railway EMC, EN 50121-4 Railway Immunity, IEC 61373 Railway
hock
Network specifications
Operating modes Standalone site
Managed in the cloud cnMaestro or VM
XMS managed in the cloud
WLAN 1,024 clients, 16 SSIDs
WPA3, WPA-TKIP, WPA2 AES, 802.1x,
802.11w PMF
Interception portal Hosted on cnMaestro or external
On-AP hosted guest portal
HTTP/RADIUS redirection
Server DNS logging
Authentication Encryption 802.1x EAP-SIM/AKA, EAP-PEAP, EAP-TTLS, EAP-TLS MAC authentication to local database or external RADIUS
Scheduled WLAN On/off by day, week, time of day
Access for guests EasyPass self-registration guest, Ambassador guest, ePSK, Vouchers, Rate Limit, Splash page hosted on AP or cnMaestro client isolation per SSID, per network
Data limit Client bitrate/time/bandwidth limit per SSID
Subscriber QoS WMM
Fast roaming 802.11r, OKC, Enhanced roaming
Mesh Multi-hop, any band
Channel selection Multimode channel selection with AutoChannel and AutoBand features. Granular control of off-channel scanning and channel selection
RF management Multi-modal RF optimization supporting AutoCell performed in intelligent edge AP. Out-of-band RF spectrum analysis, RF network self-test, RF monitor with chn/noise/interference Data rate trimming and minimum data rates
Network TCP connection logging, NAT logging firewall, DHCP server, L2, L3 or DNS based access control, VLAN Pooling, RADIUS attribute VID VLAN per SSID per user
Band Steer Load Balance Yes
Tunnel L2TP, L2oGRE, PPPoE
Network and radio frequency management tools Remote packet capture in wired and wireless networks, automatic logging, ZapD tool, rogue AP detection
Services NTP, Syslog, SNMP traps, DNS proxy, auto-off on WAN failure

Support

Downloads:

Data sheet Download

Faq

What is the maximum number of devices that can be connected to the access point?

Up to 1024 clients can be connected to the access point.

1470,65 GBP without VAT (net)
Added to cart
-
+
On stock
Print version
Session will expire in:
Seconds
You will be logged out after the session expires
Choose a different country or region to shop in the language that suits you
Our site uses cookies (so-called "cookies"). You can find more about these files, as well as about how we process your personal data, in our privacy policy.
Favorite
You are on page for country / region:
 English (EN)
Please select a different country or region to shop in a language that suits you.