EN
The Cambium Networks cnWave V3000 solution provides simple, fast and cost-effective gigabit wireless connectivity for edge access solutions and/or high-bandwidth backhaul for edge access solutions at a much lower cost of ownership than fiber infrastructure. Service providers and enterprises now have access to gigabit connectivity for business and residential customers, backhaul for Wi-Fi access or LTE/5G small cells . Certified for Facebook Terragraph, cnWave solutions are highly efficient for high-density urban and suburban deployments.
Cambium cnWave V3000 devices are powered by 802.3at Power over Ethernet and support download and upload speeds of up to 7.6 Gbps. In addition to a 10 Gigabit Ethernet port and a 1 Gigabit Ethernet port, an SFP port is available .
60 GHz cnWave works with the cnMaestro management system from Cambium Networks. The cnMaestro™ system is a local or cloud-based software platform that provides secure and comprehensive network management. The cnMaestro Wireless Network Control Panel simplifies device management by providing complete network visibility and the ability to operate without assistance. We have the ability to view and perform a range of wireless network management functions in real-time.
Features / filters | |
Number of LAN ports | 2x 10/100/1000BaseTX (RJ45), 1x [10G (SFP+)] , |
Antenna gain | Above 30dBi |
Basic general data | |
Manufacturer | Cambium |
Model | cnWave V3000 |
Model code | C600500C024A |
Type | CPE |
Spectrum | |
Frequency range | 57 to 66 GHz in a single SKU |
Channel width | 2.16 GHz, 4.32 GHz |
Connecting load-bearing beams | Up to 2 adjacent channels |
Mode of operation | PMP client or PTP |
Interface | |
Access to the channel | TDMA/TDD |
Ethernet interface | 1 x 100/1000/10G BaseT with PoE input 1 x 100/1000 BaseT with 802.3at PoE output 1 x SFP 1G and 10G |
Networks | |
Supported protocols | IPv4, IPv6, Layer2 Bridge, Layer3 IPv6 Routing, Open/R mesh |
Network management | cnMaestro, HTTP, HTTPS, SNMP v2c |
MTU | 4,000 bytes |
VLAN | 802.1ad (QinQ), 802.1Q with 802.1p priority |
QoS | 4 levels of QoS, DSCP and VLAN Tag |
Security | |
Encryption | 128-bit AES |
Safety of firmware | Signed firmware images |
Performance | |
Modulation and coding schemes | MCS-0 (BPSK) to MCS-12 (16-QAM) |
Delay | < 1 ms |
Maximum EIRP | 60.5 dBm (with 44.5 dBi antenna) 54,5 dBm (with 40,5 dBi antenna) |
Antenna | |
Gain | 44.5 dBi or 40.5 dBi |
Antenna type | Integrated |
Beamforming Scanning range | 2º azimuth, 1º elevation |
Beam width | 0.8º |
Power supply | |
Type | Passive PoE (42-57V) without AUX PoE output in use |
Power Consumption | 60 W with AUX PoE output enabled 30 W without using AUX PoE output |
Physical characteristics | |
Environmental parameters | IP66/67 |
Operating temperature | -40ºC to 60ºC (-40ºF to 140ºF) |
MTBF | > 40 years |
Weight | V3000 with 44.5 dBi antenna 4.7 kg (10.3 lbs.) without clamp V3000 with 40.5 dBi antenna 3.9 kg (10.3 lbs.) without clamp |
Dimensions | V3000 with 44.5dBi Antenna 415 x 348 x 349 mm (16.3 x 13.7 x 13.7 inches) V3000 with 40.5dBi Antenna 340 x 198 x 251 mm (13.4 x 7.8 x 9.9 inches) |
Wind resistance | 200 km/h (124 mi/h) |
Data sheet | Download |
PoE, or Power over Ethernet, is the name of a number of methods that allow to power network equipment while simultaneously transmitting data via twisted-pair cable.