![Cambium cnWave V5000 60 GHz | Base station | 1x RJ45 1000Mb/s PoE In, 1x RJ45 1000Mb/s PoE Out, EU Ilość portów LAN2x [10/100/1000M (RJ45)]](https://www.batna24.com/img2/500/330642_1.webp?20989284221)
cnWave V5000 from Cambium Networks is a microwave relay link operating in the 57 to 66 GHz band. The device is integrated with a dual-sector antenna that provides more than 22.5 dBi gain and a coverage angle of up to 280 degrees with beamforming. This backhaul radio has data rates up to 15.2 Gbit/s (7.6 Gbit/s for upload and download) with link bonding and an EIRP (equivalent isotropic radiated power) of 38 dBmW. It supports TDMA / TDD channel access, network synchronization and is certified for Terragraph technology by Facebook. This radio provides simple, fast and cost-effective gigabit wireless connectivity for edge access solutions compared to fiber infrastructure.
Up to four other distribution nodes or up to 30 client nodes can be connected to a single cnWave V5000 device. The devices are powered by 802.3at Power over Ethernet and support download and upload speeds of up to 7.6 Gbps. In addition to a 10 Gigabit Ethernet port and a 1 Gigabit Ethernet port, an SFP port is available .
60 GHz cnWave works with the cnMaestro management system from Cambium Networks. The cnMaestro™ system is a local or cloud-based software platform that provides secure and comprehensive network management. The cnMaestro Wireless Network Control Panel simplifies device management by providing complete network visibility and the ability to operate without assistance. We have the ability to view and perform a range of wireless network management functions in real-time.
| Features / filters | |
| Number of LAN ports | 2x 10/100/1000BaseTX (RJ45) |
| Antenna gain | 21dBi - 30dBi |
| Device type | Base station |
| Basic general data | |
| Manufacturer | Cambium |
| Model | cnWave V5000 |
| Model code | C600500A004A |
| Type | CPE |
| Spectrum | |
| Frequency range | 57 to 66 GHz in a single SKU |
| Channel width | 2.16 GHz, 4.32 GHz |
| Connecting load-bearing beams | Up to 2 adjacent channels |
| Mode of operation | PMP or PTP |
| Interface | |
| Access to the channel | TDMA/TDD |
| Ethernet interface | 1 x 100/1000/10G BaseT with PoE input 1 x 100/1000 BaseT with 802.3at PoE output 1 x SFP 1G and 10G |
| Networks | |
| Supported protocols | IPv4, IPv6, Layer2 Bridge, Layer3 IPv6 Routing, Open/R mesh |
| Network management | cnMaestro, HTTP, HTTPS, SNMP v2c |
| MTU | 4,000 bytes |
| VLAN | 802.1ad (QinQ), 802.1Q with 802.1p priority |
| QoS | 4 levels of QoS, DSCP and VLAN Tag |
| Security | |
| Encryption | 128-bit AES |
| Safety of firmware | Signed firmware images |
| Performance | |
| Modulation and coding schemes | MCS-0 (BPSK) to MCS-12 (16-QAM) |
| Delay | < 1 ms |
| Maximum EIRP | 38 dBm |
| Antenna | |
| Reinforcement | 22.5 dBi |
| Antenna type | Integrated |
| Beamforming Scanning range | 140º azimuth, 20º elevation |
| Beam width | 12º |
| Power supply | |
| Type | Passive PoE (42-57 V) |
| Power Consumption | 65 W with AUX PoE enabled 35 W without AUX PoE enabled |
| Physical characteristics | |
| Environmental parameters | IP66/67 |
| Operating temperature | -40ºC to 60ºC (-40ºF to 140ºF) |
| MTBF | > 40 years |
| Weight | < 4 kg (8.8 lbs) |
| Dimensions | 280 mm x 185 mm x 102 mm (11.0 in x 7.3 in x 4.0 in) |
| Wind resistance | 200 km/h (124 mi/h) |
| Data sheet | Download |
PoE, or Power over Ethernet, is the name of a number of methods that allow to power network equipment while simultaneously transmitting data via twisted-pair cable.
