EN

Cambium EPMP 3000 ROW | Access point | 5GHz 4x4 MU-MIMO, RJ45 1000Mb/s

CODE: C050910A201A

Cambium EPMP 3000 ROW | Access point | 5GHz 4x4 MU-MIMO, RJ45 1000Mb/s

CODE: C050910A201A
1019,65 GBP without VAT (net)

About product

Access point EPMP 3000 5 GHz

EPMP 3000 is an access point operating in the 4X4 MU-MIMO layer. It supports a wide frequency range. The ePMP product line from Cambium Networks has set the standard for high performance, scalability and reliability in harsh interference environments - at an attractive price. EPMP 3000 ™ is a 3rd generation access point (AP) that implements the interference tolerance mechanisms of ePMP 2000, adding Multi-User MIMO (MU-MIMO) support. EPMP 3000 is a 4X4 MU-MIMO access point that can double the bandwidth at sector level with the same bandwidth in the channel, supporting two subscribers simultaneously.

The printsheet

Use of frequencies

  • Supports GPS synchronization and SM transmission power control to enable frequency reuse.

Unmatched performance and scalability

  • With Cambium Networks' powerful MAC protocol and advanced mechanisms, it is possible to support up to 120 active subscribers - without performance losses.

Industrial standard for interference immunity

  • The intelligent filtering function on the receiving side makes ePMP 3000 resistant to strong interference, on the broadcasting side it has been used to reduce noise from adjacent channels, thus providing greater opportunities for radio co-location developers.

Best efficiency

  • MU-MIMO in the same band doubles the bandwidth of the sector, serving two MIMO users at the same time.

KEY TECHNICAL DATA CAMBIUM NETWORKS EPMP

  • 256QAM-5/6, 80 MHz support.
  • It supports a wide frequency range: 4910 - 5970 MHz.
  • 802.3at compliant with 100/1000BaseT interface standard.
  • Re-use of frequencies with GPS synchronization, interference mitigation with the beam control antenna and dynamic filtering.

Specification

SPEECHTRUM
Channel spacing Configurable in 5 MHz steps
Frequency range 4910 - 5980 MHz (exact frequencies permitted by local regulations)
Channel width 20 | 40 | 80 MHz
MAC layer (Media Access Control) Intellectual property of Cambium
Interface
Physical layer 4X4 MUMIMO / OFDM
Ethernet interface 100 / 1000BaseT, automatic speed negotiation, compatible with 802.3at + Aux port SFP
Supported power supply methods 56 V PoE (supplied), standard 802.3at PoE or CMM5 power supply with 56 V and a 5-pin adapter for the transition cable
VLAN 802.1Q with priority 802.1p
Network management HTTPs, SNMPv2c, SSH
Protocols used IPv4 / IPV6, UDP, TCP, IP, ICMP, SNMPv2c, HTTPs, STP, SSH, IGMP Snooping
EFFICIENCY
Subscribers per sector Up to 120
ARQ Yes
Nominal reception sensitivity (w / FEC) at 20 MHz channel MCS 0, -92 MCS 8 supported by Wi-Fi -68
Nominal reception sensitivity (w / FEC) at 40 MHz channel MCS0, -89 MCS9, -64
Nominal reception sensitivity (w / FEC) at 80 MHz channel MCS0, -86, MCS9 - 61
Modulation levels (adaptive) MCS0 (BPSK) to MCS 9 (256 QAM 5/6)
GPS synchronization Yes, via internal GPS or Cambium Sync (the internal GPS receiver also includes a crossover antenna and can be used without an external panel antenna)
Quality of service Three-level priority (Voice, High, Low) with DSCP, COS, VLAN ID, IP and MAC address, Broadcast, Multicast and Station Priority, MIR / CIR support *
VAS * Dynamic spectrum optimization. Possibility to change channels based on interference detection on the current channel

Support

Unboxing

Installation

Demonstration of P2P link at 254km

ePMP 3000 - webinar

To be hacked

Equipment specification (ENG) Download
cnPulse - introduction Download
Brochure EN ePMP 3000 Download
sPMP CLI - introduction Download
Sectoral antenna for ePMP3000 - information brochure Download

Faq

Can a smart antenna with ePMP 2000 be used with ePMP 3000 AP?

ePMP3000 supports a smart antenna that is used with ePMP2000.

What frequency range does Cambium Networks ePMP 3000 support?

It supports a wide frequency range: 4910 - 5970 MHz.

What characterizes the Cambium ePMP 3000?

The ePMP 5ghz 3000 system is characterized by high packet per second performance, 1.2 Gbps peak throughput and 600 Mbps peak throughput subscriber modules.

1019,65 GBP without VAT (net)
Added to cart
-
+
On stock
Session will expire in:
Seconds
You will be logged out after the session expires
Choose a different country or region to shop in the language that suits you
Our site uses cookies (so-called "cookies"). You can find more about these files, as well as about how we process your personal data, in our privacy policy.
You are on page for country / region:
English (EN)
Please select a different country or region to shop in a language that suits you.