EN

Cambium EPMP Force 200 5GHz ROW | CPE | 2x2 MIMO, RJ45 1000Mb/s

CODE: C050900C261A

Cambium EPMP Force 200 5GHz ROW | CPE | 2x2 MIMO, RJ45 1000Mb/s

CODE: C050900C261A
186,28 GBP without VAT (net)
Out of stock

About product

EPMP™ Force 200 - designed to operate in highly disturbed environments

EPMP™ Force 200 5 GHz adds a subscriber module and point-to-point radio to the 5 GHz ePMP product line with a guarantee of excellent throughput of over 200 Mbps of actual user data. Long range deployment is possible with a 25 dBi antenna. Configurable operating modes enable reliable adaptation to both symmetric and asymmetric traffic, while providing high performance and extremely low latency of 2-3 ms both ways.

Integrated ePMP Force 200 solution

The device increases range and improves throughput in the most congested environments. ePMP Force 200 is a completely redesigned Cambium Networks solution that combines highly integrated and efficient radio with a high gain antenna. The radio supports Gigabit Ethernet interface for maximum throughput. Operating in the 2.4 and 5 GHz frequency ranges, it provides customers with wireless broadband connectivity over longer distances and excellent return on investment.

Distinguishing features of the ePMP Force 200 product from Cambium Networks

  • Device designed to operate in a highly disturbed environment with the highest quality and throughput of over 200 Mbps
  • QoS (Quality of Service) management offering exceptional quality triple play services (VoIP, video and data) with three traffic levels
  • Possibility to configure the platform as a subscriber module or a high gain PTP (point to point) radio
  • Long operating range thanks to high gain antenna with 30 dBm transmission power

Specification

ePMP Force 200 specification
Channel spacing Configurable in 5 MHz increments
INTERFACE
Channel width 5 | 10 | 20 | 40 MHz
MAC Ownership of Cambium
Frequency range 2.4 GHz model: 2402-2472 MHz
5 GHz model: 4910-5970 MHz
Physical layer 2x2 MIMO/OFDM
VLAN 802.1Q with priority 802.1p
Protocols to be applied IPv4/IPv6 (Dual Stack), UDP, TCP, ICMP, SNMPv2c, NTP, STP, IGMP, SSH
Ethernet Interfaced 10/100/1000 BaseT, Cambium PoE & Standard PoE pin-out compatible
Network Management IPv4/IPv6, HTTPs, SNMPv2c, SSH, Cambium Networks CnMaestro™
PERFORMANCE
ARQ Yes
Nominal receiving sensitivity 20 MHz channel MCS0 = -92 dBm to MCS15 = -68 dBm
Nominal receiving sensitivity 40 MHz channel MCS0 = -89 dBm to MCS15 = -65 dBm
Modulation levels MCS0 (BPSK) to MCS15 (64QAM 5/6)
Environmental IP55
PHYSICAL FEATURES
Surge suppression 1 joule integrated
Quality of Service Three priority levels (voice, high, low) with packet classification by DSCP, COS, VLAN ID, IP & MAC Address, Broadcast, Multicast
Transmission power range -15 to 30 dBm (total, up to regional EIRP limit) (1 dB interval)
Temperature -30°C to 60°C
Weight 2.3 kg (5.1 lbs)
Wind resistance 145 km/h (90 mph)
Dimensions (diameter x depth) 47 cm x 28 cm (18.5 in x 11.2 in)
Measuring range 6,4 cm - 7,6 cm (2,5 in - 3 in)
Energy consumption 10 W maximum, 5 W typical
Input voltage 10 to 30 V
Encryption 128-bit AES (CCMP mode)
SAFETY
CERTIFICATES
FCCID Z8H89FT0015
Industry Canada Cert 109W-0015

Support

VIDEO

Downloads:

Quick start instructions Download
Datasheet Download
Broadband connectivity and high quality cabling Download

Faq

Does ePMP radio support Gigabit Ethernet?

Yes, Cambium Networks strives to meet the high demands of the user, ensuring the highest possible throughput.

186,28 GBP without VAT (net)
Out of stock
Print version
Session will expire in:
Seconds
You will be logged out after the session expires
Choose a different country or region to shop in the language that suits you
Our site uses cookies (so-called "cookies"). You can find more about these files, as well as about how we process your personal data, in our privacy policy.
You are on page for country / region:
English (EN)
Please select a different country or region to shop in a language that suits you.