EN
The Cambium EPMP Force 4600C is a subscriber module (SM) for broadband wireless point-to-point (PTP) and point-to-multipoint (PMP) applications in the 6 GHz band. The Cambium EPMP Force 4600C provides high capacity, low latency and high reliability data transmission in congested and limited spectrum. The Cambium EPMP Force 4600C is compatible with ePMP 4600 access points, which use MU-MIMO technology to achieve more than 4 Gbps per sector. The Cambium EPMP Force 4600C is easy to install, configure and manage using Cambium Networks' cnMaestro™ system.
The Cambium EPMP Force 4600C uses 802.11ax technology, which allows the use of channels up to 160 MHz wide and modulation up to 4096 QAM. As a result, the Cambium EPMP Force 4600C achieves throughput of up to 2 Gbps in PTP mode and up to 1 Gbps in PMP mode. The Cambium EPMP Force 4600C also uses ePTP technology, which reduces latency to less than 5 ms and increases spectral efficiency.
The Cambium EPMP Force 4600C is compatible with ePMP 4600 access points, which use MU-MIMO technology to simultaneously transmit up to two ePMP 4600 subscriber modules. This enables ePMP 4600 access points to reach a throughput of more than 4 Gbps per sector to support more users and applications with high bandwidth demands.
The Cambium EPMP Force 4600C has an RP-SMA connector that allows you to connect an external antenna of any shape and gain. This allows you to match the antenna to the field conditions and distance requirements. Cambium EPMP Force 4600C also has an SFP port , which allows you to connect a fiber optic cable for better noise immunity and higher signal quality. The Cambium EPMP Force 4600C also has security features such as AES encryption, MAC authentication and firewall.
The Cambium EPMP Force 4600C is easy to install and configure with an intuitive user interface and tools such as LINKPlanner and cnHeat to help with network planning and coverage optimization. The Cambium EPMP Force 4600C is also easy to manage with Cambium Networks ' cnMaestro™, which enables remote monitoring, updates, reports and alerts for the entire network.
The Cambium EPMP Force 4600C is a subscriber module (SM) for broadband wireless point-to-point (PTP) and point-to-multipoint (PMP) applications in the 6 GHz band. The Cambium EPMP Force 4600C provides high capacity, low latency and high reliability data transmission in congested and limited spectrum. The Cambium EPMP Force 4600C is compatible with ePMP 4600 access points, which use MU-MIMO technology to achieve more than 4 Gbps per sector. The Cambium EPMP Force 4600C is easy to install, configure and manage using Cambium Networks' cnMaestro™ system.
Spectrum | |
Channel width | 20 | 40 | 80 | 160 MHz |
Proprietary physical layer | ePMP radio interface with 2x2 MIMO/OFDMA |
Channel spacing | Configurable in 5 MHz increments |
Frequency range | 5725 - 7125 MHz |
Interfaces | RJ45 100/1000 BaseT, Auto-negotiation, 802.3at compliant; SFP port |
Protocols | IPv4/IPV6 , UDP, TCP, IP, ICMP, SNMPv2c, HTTPs, STP, SSH, IGMP Snooping |
VLAN | 802.1Q with 802.1p priority |
Management | HTTP/HTTPS, SNMPv1/2, SNMPv3, SSH |
Physical parameters | |
Degree of tightness | IP67 |
Operating temperature | -30°C to 55°C (-22°F to 131°F) |
Weight | 0.73 kg (1.61 lbs) without handle |
Dimensions | 256 x 125 x 47 mm (10.1 x 4.9 x 1.9 in) |
Energy consumption | 28W |
Input voltage | 44V - 59V |
Antenna | External Dish |
Security | |
Encryption | 128-bit AES (CCMP mode), 256-bit AES optional where allowed |