Cisco Business 140AC | Access Point | 802.11ac 2x2 Wave 2 Ceiling Mount

CODE: CBW140AC-E / EAN: 0889728276054

Cisco Business 140AC | Access Point | 802.11ac 2x2 Wave 2 Ceiling Mount

CODE: CBW140AC-E / EAN: 0889728276054
125,01 EUR without VAT (net)
Out of stock
Maximum wireless transmission speed: 1200 Mb/s
Number of LAN ports: 1x 10/100/1000BaseTX (RJ45)
Operating frequency: Dual Band (2.4GHz, 5GHz)
Show more parameters
Recommended products
Subscribe to the NEWSLETTER and receive 5EUR* for shopping
* Offer valid for orders from 45EUR |Regulation|


New products



Cisco Business 140AC Access Point

Cisco Business 140AC access point provides support for the latest Wi-Fi standard, IEEE 802.11ac Wave 2. It also meets the growing demands for wireless network flexibility with the introduction of mesh technology - all with ease of use.
Inevitable for smaller networks, the Cisco® Business 140AC access point with a full range of advanced Cisco features.


Features and benefits

According to the 802.11ac Wave 2 standard, the Cisco Business 140AC access point provides a data transfer rate of up to 867 Mb/s at 5GHz. This exceeds the capabilities offered by access points supporting 802.11n standard. It also allows for a total, two-radio data transmission speed up to 1 Gb/s. In recent years, small businesses have increasingly preferred wireless access as the primary form of network communication in the office. The Cisco Business 140AC access point provides performance for highly secure and reliable wireless connections.


Multi-User (MU) Multiple-Input Multiple-Output (MU-MIMO) technology allows simultaneous data transmission to multiple 802.11ac Wave 2 clients to improve customer service. Prior to the introduction of MU-MIMO technology, 802.11n and 802.11ac Wave 1 access points could only transmit data simultaneously to a single client, usually referred to as Single-User MIMO (SU-MIMO). 802.11ac Wave 2 with 2x2:2 MIMO technology uses two radio streams when operating in SU-MIMO or MU-MIMO mode, offering speeds up to 867 Mbps.

Simplified management

The Cisco Business Mobile application allows for easy implementation and configuration of many Cisco Business access points and Mesh devices without a physical controller. Optional remote management of multiple access points is available through Cisco FindIT Network Management application.

Mesh technology support

It is possible to mix Cisco Business Mesh devices and access points to increase the range of WiFi networks.

Enhanced wireless performance and range with Mesh technology

The Cisco Business 140AC access point supports the latest 802.11ac Wave 2 standard, providing higher performance, greater network coverage. With simultaneous support for two bands with 802.11ac Wave 2 MU-MIMO, this access point can support more devices and high-bandwidth applications. Integrated Mesh technology enables easy and safe implementation. Mesh Cisco Business Wireless Extenders allow you to easily increase your network coverage and capacity. These models can be placed on your desk, plugged into an AC outlet or mounted directly on the wall.

Cisco Business Mobile application

The Cisco Business 140AC access point is managed through Cisco Business Mobile, an intuitive mobile application that simplifies traditional wireless deployment challenges directly from the smartphone. You can easily expand your network by adding new Mesh extensions using Quick Response (QR) codes and activating your wireless network in minutes. The powerful management function dynamically changes the network configuration, e.g. allowing secure guest access. Network usage, traffic patterns and bandwidth can be closely monitored, providing real-time data; this not only provides peace of mind, but virtually ensures optimal service. Cisco Business Mobile is available for iPhone, iPad and Android devices.

Power supply via Ethernet

The Cisco Business 140AC access point has a single port uplink Gigabit Ethernet and is powered by Power over Ethernet (802.3af PoE standard).


This elegant, compact access point is designed for flexible mounting possibilities. It can be mounted directly on the ceiling (including T-bar mounting) or wall. It is easy to install and the mounting hardware is included.


Features / filters
LAN standard Gigabit Ethernet 10/100/1000 Mb/s
Maximum wireless transmission speed 1200 Mb/s
Number of LAN ports 1x 10/100/1000BaseTX (RJ45)
Operating frequency Dual Band (2.4GHz, 5GHz)
Wireless network standards IEEE 802.11ac Wave 2, IEEE 802.11n,
2.4 GHz Yes
5 GHz Yes
Antenna features Integrated antenna
Antenna gain Under 10dbi
Antenna gain level (max) 4
Antenna type Integrated, Internal,
Application Indoor
Built-in processor Yes
Cabling technology 10/100/1000Base-T(X)
Certification UL 60950-1 CAN/CSA-C22.2 No. 60950-1 UL 2043 IEC 60950-1 EN 60950-1 FCC 15.247, 15.407 RSS-247 (Canada) EN 300.328, EN 301.893 (Europe) ARIB-STD 66 (Japan) ARIB-STD T71 (Japan) EMI (Class B) FCC Part 15.107 / 15.109 ICES-003 (Canada) VCCI (
Channels quantity 29
Depth 150.8
Dynamic Frequency Selection (DFS) Yes
Ethernet LAN (RJ-45) ports 1
Ethernet LAN data rates 10,100,1000
Flash memory 256
Frequency band 2.412 - 2.472, 5.18 - 5.32, 5.5 - 5.7
Harmonized System (HS) code 85176990
Height 33
Internal memory 1024
LED indicators Yes
MAC address filtering Yes
Maximum data transfer rate 867
Maximum data transfer rate (2.4 GHz) 300
Maximum data transfer rate (5 GHz) 867
Networking standards IEEE 802.11a, IEEE 802.11ac, IEEE 802.11b, IEEE 802.11d, IEEE 802.11g, IEEE 802.11h, IEEE 802.11i, IEEE 802.11n, IEEE 802.11r, IEEE 802.3, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3at, IEEE 802.3u
Non-operating altitude 0 - 4500
Number of products included 1
Number of users 400
Numbers of pieces in the package 1-pack
Operating altitude 0 - 3000
Operating relative humidity (H-H) 10 - 90
Operating temperature (T-T) 0 - 50
Placement Ceiling
Power over Ethernet (PoE) Yes
Processor frequency 710
Product colour White
Remote Authentication Dial-In User Service (RADIUS) Yes
Storage relative humidity (H-H) 10 - 90
Storage temperature (T-T) -30 - 70
Transmitting power 20
Type of device power supply PoE 802.3af/at
VLAN support Yes
Weight 400
Wi-Fi Multimedia (WMM)/(WME) Yes
Width 150.8

Technical Specification
Authentication and security Wi-Fi Protected Access 2 (WPA2) WPA3 will appear after the release of FCS (Post-Frame Check Sequence).
802.1X, RADIUS Authentication, Authorization, and Accounting (AAA)
● Segmentation by VLAN (up to 16)
● 802.11r and 802.11i
The guest network can also authenticate with Google and Facebook
Maximum number of clients Maximum number of connected wireless clients: 200 per one Wi-Fi radio, total of 400 clients per access point
Maximum access points ● 50
● Recommended up to 25
Maximum number of Mesh Extenders ● 25 per access point, up to 8 hops
802.11ac MIMO 2x2 single-user/multi-user MIMO with two spatial streams, up to 867 Mbps at 5GHz.
Channels 20, 40 and 80-MHz
Dynamic frequency selection (DFS)
Ethernet ports Authentication with 802.1X or MAC filter
Dynamic VLAN or per port
Local traffic switched or tunnelled back to the main AP
Supported data rates 802.11a: 6, 9, 12, 18, 24, 36, 48, 54 Mb/s
802.11b/g: 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, 54 Mb/s
802.11n 2.4 GHz: 6.5 to 300 Mbps (MCS0-MCS15, HT 20/40)
802.11ac 5 GHz: 6.5 to 867 Mbps (MCS0-MCS9)
Transmission power settings available 2.4 GHz Up to 20 dBm
5 GHz Up to 20 dBm
Integrated antennas 2.4 GHz, 2 dBi gain
5 GHz, 4 dBi gain
Interfaces 1x Gigabit Ethernet (automatic 10/100/1000BASE-T detection), Power over Ethernet (PoE)
LEDs The status LED indicates the status of the start-up program, connection status, operating status, warnings for the start-up program, start-up program errors.
Dimensions (W x L x H) Access point 150.8 x 150.8 x 33 mm
Weight Access point without mounting bracket and other accessories: 400 g
Environmental Action:
Temperature: 32° to 104°F (0° to 50°C)
Humidity: 10% to 90% (non-condensing)
Maximum height: 9843 feet (3000 m) at 40°C
Warehousing and transportation:
Temperature: -22° to 158°F (-30° to 70°C)
Humidity: 10% to 90% (non-condensing)
Maximum height: 15 000 feet (4500 m) at 25°C
System resources 1 GB DRAM, 256 MB flash
710-MHz quad-core processor
Power options 802.3af/at Ethernet switch; Cisco Business switch with PoE is recommended
Optional PoE Injector Cisco Business
Power consumption Max. 8.3W
Mounting kit - Mounting bracket
- Torx security screw
- Ceiling rail clip
Guarantee Cisco Business Limited Lifetime Equipment Warranty
Free software updates



Cisco Business 140AC Access Point - Catalogue card (ENG) Download
Cisco Business 140AC Access Point - Quick Installation Guide (ENG) Download
Application description of Cisco Business Access Point and Cisco Business 100 Series Mesh Extenders (ENG) devices Download
125,01 EUR without VAT (net)
Out of stock
Print version
Session will expire in:
You will be logged out after the session expires
Choose a different country or region to shop in the language that suits you
Our site uses cookies (so-called "cookies"). You can find more about these files, as well as about how we process your personal data, in our privacy policy.
You are on page for country / region:
English (EN)
Please select a different country or region to shop in a language that suits you.