EN

Cisco Catalyst 2960X | Switch | 48x RJ45 1000Mb/s PoE, 2x SFP+, 740W

CODE: CIWS-C2960X-48FPD-L

Cisco Catalyst 2960X | Switch | 48x RJ45 1000Mb/s PoE, 2x SFP+, 740W

CODE: CIWS-C2960X-48FPD-L
510,88 GBP without VAT (net)
Out of stock
Number of LAN ports: 48x [10/100/1000M (RJ45)] 2x [10G (SFP+)]
Number of PoE ports: 48x [802.3af/at (1G)]
Built-in modem: None
Show more parameters

About product

Cisco Catalyst 2960-X

The Cisco Catalyst 2960-X is a line of tower switches with support for Gigabit Ethernet access technology. The Cisco Catalyst 2960-X models provide second layer (L2 layer) switching and are equipped with one main power supply with the ability to install an additional backup power source. These switches feature 48 Gigabit Ethernet ports, support Power Over Ethernet / Power over Ethernet Plus(PoE / PoE+), and four Gigabit Ethernet Small Form-Factor Pluggable(SFP) or two 10 Gigabit Ethernet Small Form-Factor Pluggable Plus(SFP+) channels. The switches operate with two 600 Mhz core processors. FlexStack-Plus technology allows you to build a stack of 8 switches and provides 80 GB/s throughput. To provide visualization and control of the traffic of various applications on the network, Cisco added the NetFlow Lite feature, which allows engineers to monitor and manage data streams across all network segments.

79305013248_n.jpg

Energy efficiency and great functionality

Leveraging technologies such as Cisco EnergyWise and Energy Efficient Ethernet, the Catalyst 2960 X-Series Switches deliver best-in-class energy efficiency, and the Switch Hibernation Mode mechanism achieves dramatic reductions in power consumption with up to 80% power savings in some cases.

9817717953_n.jpg

Thesoftware (feature set) for Cisco Catalyst 2960-X switches is available in LAN Base and Lan Lite Image. LAN Base has enhanced functionality, including improved security (ACLs), DHCP Snooping, and additional access control features-Web authentication and 802.1 x extensions, additional QoS installation capabilities, support for redundant RPS power, and a large number of SFP ports. Flex Links and link state tracking features, increased number of supported VLANs (up to 256), Host IPv6, MLD Snooping, LLDP-MED, RSPAN, MVR, DHCP 82 and IP SLA (responder) option and so on. The LAN Lite image supports basic Layer 2 features and is primarily designed for use in small organizations, while LAN Base fully supports Layer 2 features and is designed for use in medium to large organizations. Cisco Catalyst 2960-XR switches are available with the IP Lite feature set. The IP Lite feature set already supports Layer 3 (i.e., has routing features) and is also targeted for medium and large organizations.

1158321_n.jpg

Key Features

  • 48 Gigabit Ethernet ports with line-rate performance
  • 2 fixed 10 Gigabit Ethernet SFP+ links
  • PoE+ support with up to 740W power budget and Perpetual PoE
  • Cisco IOS LAN Base or LAN Lite1 and Cisco IOS IP Lite
  • Device management via web interface, Bluetooth access, Command Line Interface (CLI), Simple Network Management Protocol (SNMP) and RJ-45 or USB console access
  • Network management with Cisco Prime® , Cisco Network Plug and Play and Cisco DNA Center
  • Stacking with FlexStack-Plus and FlexStack-Extended
  • Layer 3 features with routed access (Open Shortest Path First [OSPF]), static routing and Routing Information Protocol (RIP)
  • Visibility with domain name system as authoritative source (DNS-AS) and full (flexible) NetFlow
  • Security with 802.1 X, Serial Port Analyzer (SPAN) and Bridge Protocol Data Unit (BPDU) Guards
  • Reliability with higher Mean Time Between Failures (MTBF) and extended Limited Lifetime Warranty (E-LLW)
  • Ruggedness with optional dual field power supplies2

Specification

Features / filters
LAN standard Gigabit Ethernet 10/100/1000 Mb/s
Number of LAN ports 48x [10/100/1000M (RJ45)] , 2x [10G (SFP+)] ,
Number of PoE ports 48x [802.3af/at (1G)]
Built-in modem None
Management By web browser, CLI - Command Line Interface,
Power (W) 740
Switching layer 3, 2,
Type of case Rack (1U), Metal,

Management characteristics
Switch type Managed
Multilayer switch L2
Quality of Service (QoS) support Yes
Management via website Yes
Connectivity
Basic switching RJ-45 Number of Ethernet ports 48
Basic Ethernet Switching RJ-45 ports type Gigabit Ethernet (10/100/1000)
Number of SFP+ module slots 2
Console port RJ-45
Number of USB 2.0 ports 2
Computer network
Communication standards IEEE 802.1ab, IEEE 802.1D, IEEE 802.1p, IEEE 802.1Q, IEEE 802.1s, IEEE 802.1w, IEEE 802.1x, IEEE 802.3, IEEE 802.3.3ab, IEEE 802.3ad, IEEE 802.3ae, IEEE 802.3af, IEEE 802.3ah, IEEE 802.3at, IEEE 802.3az, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z
10G support Yes
Full duplex Yes
Connection aggregator Yes
Traffic growth control Yes
Frequency limit Yes
Automatic MDI/MDI-X Yes
Spanning tree protocol Yes
VLAN support Yes
Number of VLANs 1023
Transmission (broadcast) of Data
Routing/switching capacity 216
Compatible with Jumbo Frames Yes
Security
DHCP functions DHCP server
supports SSH/SSL Yes
IGMP snooping Yes
Access Control List (ACL) Yes
Multicast functions
Multicast support Yes
Design
Frame installation possibilities Yes
Stackable product Yes
Product colour Black
Security UL 60950-1, CAN/CSA-C22.2 No. 60950-1, EN 60950-1, IEC 60950-1, AS/NZS 60950-1
LEDs Yes
Work
Embedded processor Yes
Processor model AppliedMicro APM8639
Processor speed 600
Memory type DRAM
Flash memory size 128
Internal memory capacity 512
Noise level 43
MTBF (Mean Time Between Failure) 445,460
Energy management
Backup Power Supply (RPS) Yes
Number of power units 1
AC input voltage 100 - 240
AC input frequency 50 - 60
Power consumption 47,1
External conditions
Temperature range (operation) -5 - 40
Temperature range (storage) -25 - 70
Relative humidity range 10 - 95
Permissible relative humidity 10 - 95
Permissible altitude during operation (above sea level) 0 - 3000
Permissible altitude (above sea level) 0 - 4000
Weight and dimensions
Product width 445
Product depth 279
Product height 45
Product weight 4,3
Other characteristics
Power LED indicator Yes

Support

Downloads:

Data sheet Download

Faq

Can multiple switches be managed simultaneously?

Because the switches can be stacked with up to 8 switches, it is possible to control them simultaneously, making hardware configuration easier.

510,88 GBP without VAT (net)
Out of stock
Print version
Session will expire in:
Seconds
You will be logged out after the session expires
Choose a different country or region to shop in the language that suits you
Our site uses cookies (so-called "cookies"). You can find more about these files, as well as about how we process your personal data, in our privacy policy.
You are on page for country / region:
English (EN)
Please select a different country or region to shop in a language that suits you.