![Cisco Catalyst 2960X | Switch | 48x RJ45 1000Mb/s, 4x SFP Ilość portów LAN48x [10/100/1000M (RJ45)]](https://www.batna24.com/img2/500/329652_1.webp?20989284221)
This is a Gigabit Ethernet switch type device. The Cisco Catalyst 2960X series switch has a configuration that allows it to be stacked. The Catalyst 2960X devices are run on the Cisco IOS. It is very simple and functional software. The Cisco Catalyst 290X switch allows for great network management in large or small businesses. Besides, the device is very easy to implement, configure and in case of problems has quick access to technical support. These are stackable switches, fully functional and independent. The device guarantees extended functionality of the second and third layer. They have additional power supply Power over Ethernet Plus (PoE +).
| Features / filters | |
| LAN standard | Gigabit Ethernet 10/100/1000 Mb/s |
| Number of LAN ports | 48x [10/100/1000M (RJ45)] , 4x [1G (SFP)] , |
| Type of case | Rack (1U) |
| Management features: | |
| Switch type | Managed by |
| Multi-layer switch | L2/L3 |
| Service Quality Support (QoS) | Yes |
| Management by website | Yes |
| ARP Inspection | Yes |
| MIB support | Yes |
| Communication | |
| Basic switching RJ-45 Number of Ethernet ports | 24 |
| Basic Ethernet switching RJ-45 ports type | Gigabit Ethernet (10/100/1000) |
| Number of Gigabit Ethernet ports | 24 |
| Number of slots of the SFP module | 4 |
| Console port | RJ-45 |
| Number of USB 2.0 ports | 2 |
| Ports and interfaces | |
| Basic switching RJ-45 Number of Ethernet ports | 24 |
| Basic Ethernet switching RJ-45 ports type | Gigabit Ethernet (10/100/1000) |
| Number of Gigabit Ethernet ports | 24 |
| Number of slots of the SFP module | 4 |
| Console port | RJ-45 |
| Number of USB 2.0 ports | 2 |
| Computer network | |
| 10G service | Yes |
| Communication standards | IEEE 802.1ab,IEEE 802.1D,IEEE 802.1p,IEEE 802.1Q,IEEE 802.1s,IEEE 802.1w,IEEE 802.1x,IEEE 802.3,IEEE 802.3ab,IEEE 802.3ad,IEEE 802.3ae,IEEE 802.3af,IEEE 802.3ah,IEEE 802.3at,IEEE 802.3az,IEEE 802.3u,IEEE 802.3x,IEEE 802.3z. |
| Full duplex | Yes |
| Connection aggregator | Yes |
| Control of traffic growth | Yes |
| Frequency limit | Yes |
| Automatic MDI/MDI-X | Yes |
| Protocol of the splitting tree | Yes |
| Auto-Negotiation | Yes |
| VLAN support | Yes |
| Number of VLANs | 1023 |
| Transmission of data | |
| Routing/switching capacity | 216 |
| Capacity | 71,4 |
| Size of address table | 16000 |
| Number of queues | 8 |
| Number of static routes | 1000 |
| Compatible with Jumbo Frames | Yes |
| Extension of Jumbo Frames | 9216 |
| Security | |
| DHCP functions | DHCP server |
| Access control list (ACL) | Yes |
| Access Control List Rules (ACL) | 3 |
| IGMP snooping | Yes |
| Encryption / security | SNMP,SSH |
| supports SSH/SSL | Yes |
| Credibility | MAC-based authentication, Port-based authentication |
| Multicast functions | |
| Multicast support | Yes |
| Number of filtered multiemission groups | 1000 |
| Protocols | |
| Management protocols | SNMPv3 |
| Changeover Protocol | UDP, TCP, RADIUS/TACACS+ |
Cisco Catalyst 2960-X has 48x [10/100/1000M] and 4x 1G SFP
Yes, the switch is manageable
