Cisco CBS110-16T | Switch | 16x RJ45 1000Mb/s, Desktop, Rack, Unmanaged

CODE: CBS110-16T-EU / EAN: 889728326001

Cisco CBS110-16T | Switch | 16x RJ45 1000Mb/s, Desktop, Rack, Unmanaged

CODE: CBS110-16T-EU / EAN: 889728326001
112,57 EUR without VAT (net)
Any customs costs and VAT are to be borne by the buyer in the country of receipt.
Number of LAN ports: 16x [10/100/1000M (RJ45)]
10G support: No
AC input frequency: 50/60
Show more parameters
Subscribe to the NEWSLETTER and receive 5EUR* for shopping
* Offer valid for orders from 45EUR |Regulation|


New products



Cisco CBS110 Series

Cisco, one of the world's largest network equipment companies, has an entire series of CBS110 unmanaged switches that are designed for businesses with basic networking needs. They can be used to reduce network infrastructure costs in cases where no complex configuration is required. For example, in video surveillance networks, server management, thin clients and a large number of other similar devices deployed compactly on a single subnet.


Cisco CBS110-16T Switch

One of the new models in this family is the CBS110-16T-EU in a metal case that can be mounted on a table or in a rack (1U, 19"). The device measures 279 × 170 × 44 mm and weighs 0.97 kg. The switch has a built-in power supply for ~110/220 V mains. Power consumption does not exceed 11.53 W. The lack of fans and support for 802.3az, which regulates power consumption according to network activity, reduces operating costs. Operating temperature range: 0 °C to 40 °C. MTBF (at 25 °C) of 2.685 million hours

Outstanding achievements

TheCisco CBS110-16T-EU has 16 RJ-45 ports (10/100/1000 Mbps) with a total switching speed of 32 Gbit/s. The traffic processing rate is 23.8 mpps (for 64-byte packets), the MAC-address table size is 8000, and the packet buffer size is 2 Mb. The switch has a number of additional features. It supports 802.1p to implement QoS, i.e., prioritization of traffic of delay-sensitive services. A loop detection tool is also available, and line diagnostic tools allow you to quickly find and resolve network cabling problems. In addition, the switch can also detect and drop "bad" packets to prevent them from propagating further down the network.


Reliability and simplicity

The CBS110-16T-EU is reliable, affordable and plug-and-forget, meaning it requires no configuration, software installation or special knowledge on the part of the user. The integrated controller automatically detects the type of devices being connected and selects the best mode for each port. This makes the switch the best choice for small businesses that don't have their own IT department.



Features / filters
LAN standard Gigabit Ethernet 10/100/1000 Mb/s
Number of LAN ports 16x [10/100/1000M (RJ45)]
10G support No
AC input frequency 50/60
AC input voltage 110 - 240
Auto MDI/MDI-X Yes
Basic switching RJ-45 Ethernet ports quantity 16
Basic switching RJ-45 Ethernet ports type Gigabit Ethernet (10/100/1000)
Built-in modem None
Built-in processor Yes
Cable types supported Cat5e
Certification UL (UL 60950), CSA (CSA 22.2), CE mark, FCC Part 15 (CFR 47) Class A, FCC Class B
Copper ethernet cabling technology 10BASE-T,100BASE-TX,1000BASE-T
Depth 170
Ethernet LAN data rates 10,100,1000
Flash memory 16
Flow control support Yes
Form factor 1U
Forwarding rate 23.8
Full duplex Yes
Gigabit Ethernet (copper) ports quantity 16
Half duplex Yes
Harmonized System (HS) code 85176990
Head-of-line (HOL) blocking Yes
Heat dissipation 39.34
Height 44
Internal memory 128
Jumbo frames 9216
Jumbo frames support Yes
LED indicators Yes
MAC address table 8192
Management No
Mean time between failures (MTBF) 2685092
Networking standards IEEE 802.1p,IEEE 802.3,IEEE 802.3ab,IEEE 802.3az,IEEE 802.3u,IEEE 802.3x
Number of power supply units 1
Number of queues 4
Operating relative humidity (H-H) 10 - 90
Operating temperature (T-T) 0 - 40
Power over Ethernet (PoE) No
Power supply included Yes
Processor frequency 400
Product colour Grey
Quality of Service (QoS) support Yes
Queue scheduling algorithms Weighted Round Robin (WRR)
Quick start guide Yes
Rack mount kit Yes
Rack mounting Yes
Redundant power supply (RPS) support No
Storage relative humidity (H-H) 5 - 90
Storage temperature (T-T) -20 - 70
Switch layer L2
Switch type Unmanaged
Switching capacity 32
Switching layer 2
Type of case Rack (1U), Desktop,
Weight 970
Width 279

Basic general data
Manufacturer Cisco
Model CBS110-16T
Performance characteristics
Throughput in millions of packets per second (mpps) (64-byte packets) 23.8 mpps
Gigabit per second (Gbps) switching capacity 32 Gbps
General features
Blocking a Line Header (HOL) Prevention of HOL blockage
MAC table 8K addresses
Jumbo frame 9216 bytes
Quality of Service (QoS) 802.1p priority-based, 4 hardware queues, priority queuing and weighted rotation (WRR)
Loop detection Helps detect loops in the network to avoid broadcast storms
Cable diagnostics Quickly identify and resolve network cable faults and/or short circuits
Media-dependent interface Automatic media dependent interface (MDI) and MDI-X crossover
Standards IEEE 802.3 10BASE-T Ethernet, IEEE 802.3u 100BASE-TX Fast Ethernet, IEEE 802.3ab 1000BASE-T Gigabit Ethernet, IEEE 802.3z Gigabit Ethernet, IEEE 802.3x Flow Control, 802.1p priority, Energy Efficient Ethernet, 802.3af, Power over Ethernet
Hardware features
Ports 16 10/100/1000 Gigabit Ethernet RJ45 ports
Power over Ethernet (PoE) 802.3af Not supported
LEDs Power, link/activity (cable diagnostics, loop detection), Gigabit, * PoE, * Max PoE,. * If present
Wiring type Category 5e or better
Mounting options Desk, wall or rack mountable
Physical security lock Kensington lock slot
Flash 16 MB
Processor memory 128 MB
Packet buffer 2 Mbit
Environmental features
Device dimensions (W x D x H) 279 x 170 x 44 mm (11 x 6.7 x 1.73 in)
Unit weight 0.97 kg (2.14 lb)
Power supply 110-240 VAC, 50-60 Hz, internal, universal
Power consumption (worst case) 110V=11,33W 220V=11,53W
Heat dissipation (BTU/hour) 39.34
Ecological (energy efficiency) Supports IEEE 802.3az on all Gigabit Ethernet copper ports
Compliance/certifications UL (UL 60950), CSA (CSA 22.2), CE Mark, FCC Part 15 (CFR 47) Class A, FCC Class B
Operating temperature 32° to 104°F (0° to 40°C)
Storage temperature -4° to 158°F (-20° to 70°C)
Humidity during operation 10% to 90%, relative, non-condensing
Storage Humidity 5% to 90%, relative, non-condensing
Acoustic noise and mean time between failures (MTBF) 2,685,092 hours


Files to download

Data sheet Download
Installation instructions Download
Quick reference guide Download


Does the Cisco CBS110-16T-EU switch have PoE powered outputs?

Unfortunately, the Cisco CBS110-16T-EU does not support PoE power.

Recommended products
112,57 EUR without VAT (net)
Any customs costs and VAT are to be borne by the buyer in the country of receipt.
Added to cart
Print version
Session will expire in:
You will be logged out after the session expires
Choose a different country or region to shop in the language that suits you
Our site uses cookies (so-called "cookies"). You can find more about these files, as well as about how we process your personal data, in our privacy policy.
You are on page for country / region:
English (EN)
Please select a different country or region to shop in a language that suits you.