EN
Cisco, one of the world's largest network equipment companies, has an entire series of CBS110 unmanaged switches that are designed for businesses with basic networking needs. They can be used to reduce network infrastructure costs in cases where no complex configuration is required. For example, in video surveillance networks, server management, thin clients and a large number of other similar devices deployed compactly on a single subnet.
One of the new models in this family is the CBS110-5T-D in a metal case that can be mounted on a table. The unit measures 110 × 75 × 30 mm and weighs 0.23 kg, making it easy to place anywhere on a desk or shelf. Power consumption is less than 2.34W. Fanless operation and support for 802.3az, which adjusts power consumption according to network activity, help reduce running costs. Operating temperature range: 0 °C to 40 °C MTBF (at 25 °C) is 4.243 million hours.
Cisco CBS110-5T-D has 5 RJ-45 ports (10/100/1000 Mbps) with a total switching speed of 10 Gbit/s. The traffic processing rate is 7.4 mpps (for 64-byte packets), the MAC-address table size is 2000, and the packet buffer size is 1 Mb. The switch has a number of additional features. It supports the 802.1p standard to implement QoS, i.e., prioritizing traffic of delay-sensitive services. A loop detection tool is also available, and line diagnostic tools allow you to quickly find and resolve network cabling problems. In addition, the switch can also detect and drop "bad" packets to prevent them from propagating further down the network.
The CBS110-5T-D is reliable, affordable and plug-and-forget, meaning it requires no configuration, software installation or special knowledge on the part of the user. The integrated controller automatically detects the type of devices being connected and selects the best mode for each port. This makes the switch the best choice for small businesses that don't have their own IT department.
Features / filters | |
LAN standard | Gigabit Ethernet 10/100/1000 Mb/s |
Number of LAN ports | 5x 10/100/1000BaseTX (RJ45) |
10G support | No |
Auto MDI/MDI-X | Yes |
Basic switching RJ-45 Ethernet ports quantity | 5 |
Basic switching RJ-45 Ethernet ports type | Gigabit Ethernet (10/100/1000) |
Built-in modem | None |
Certification | UL (UL 60950), CSA (CSA 22.2), CE mark, FCC Part 15 (CFR 47) Class A, FCC Class B |
Copper ethernet cabling technology | 10BASE-T, 100BASE-TX, 1000BASE-T |
DC input voltage | 12 |
Depth | 75 |
Ethernet LAN data rates | 10,100,1000 |
Flow control support | Yes |
Form factor | 1U |
Forwarding rate | 7.4 |
Full duplex | Yes |
Gigabit Ethernet (copper) ports quantity | 5 |
Half duplex | Yes |
Harmonized System (HS) code | 85176990 |
Head-of-line (HOL) blocking | Yes |
Heat dissipation | 9.34 |
Height | 30 |
Jumbo frames | 9216 |
Jumbo frames support | Yes |
LED indicators | Yes |
MAC address table | 2048 |
Management | No |
Mean time between failures (MTBF) | 4243002 |
Networking standards | IEEE 802.1p, IEEE 802.3, IEEE 802.3ab, IEEE 802.3az, IEEE 802.3u, IEEE 802.3x |
Number of power supply units | 1 |
Number of queues | 4 |
Operating relative humidity (H-H) | 10 - 90 |
Operating temperature (T-T) | 0 - 40 |
Power over Ethernet (PoE) | No |
Power supply included | Yes |
Product colour | Grey |
Quality of Service (QoS) support | Yes |
Queue scheduling algorithms | Weighted Round Robin (WRR) |
Quick start guide | Yes |
Rack mounting | Yes |
Redundant power supply (RPS) support | No |
Storage relative humidity (H-H) | 5 - 90 |
Storage temperature (T-T) | -20 - 70 |
Switch layer | L2 |
Switch type | Unmanaged |
Switching capacity | 10 |
Switching layer | 2 |
Type of case | Desktop |
Weight | 230 |
Width | 110 |
Basic general data | |
Manufacturer | Cisco |
Model | CBS110-5T-D |
Performance characteristics | |
Throughput in millions of packets per second (mpps) (64-byte packets) | 7.4 mpps |
Gigabit per second (Gbps) switching capacity | 10 Gbps |
General features | |
Blocking a Line Header (HOL) | Prevention of HOL blockage |
MAC table | 8K addresses |
Jumbo frame | 9216 bytes |
Quality of Service (QoS) | 802.1p priority-based, 4 hardware queues, priority queuing and weighted rotation (WRR) |
Loop detection | Helps detect loops in the network to avoid broadcast storms |
Cable diagnostics | Quickly identify and resolve network cable faults and/or short circuits |
Media-dependent interface | Automatic media dependent interface (MDI) and MDI-X crossover |
Standards | IEEE 802.3 10BASE-T Ethernet, IEEE 802.3u 100BASE-TX Fast Ethernet, IEEE 802.3ab 1000BASE-T Gigabit Ethernet, IEEE 802.3z Gigabit Ethernet, IEEE 802.3x Flow Control, 802.1p priority, Energy Efficient Ethernet, 802.3af, Power over Ethernet |
Hardware features | |
Ports | 5 10/100/1000 Gigabit Ethernet RJ45 ports |
Power over Ethernet (PoE) 802.3af | Not supported |
LEDs | Power, link/activity (cable diagnostics, loop detection), Gigabit, * PoE, * Max PoE,. * If present |
Wiring type | Category 5e or better |
Mounting options | Desk, wall or rack mountable |
Physical security lock | Kensington lock slot |
Flash | 8 MB |
CPU | 400 MHz ARM |
Processor memory | 64 MB |
Packet buffer | 1 Mbit |
Environmental features | |
Device dimensions (W x D x H) | 110 x 75 x 30 mm (4.33 x 2.95 x 1.18 in) |
Weight of device | 0,23 kg (0,52 lb) |
Power supply | DC 12V, 1.0A |
Power consumption (worst case) | 110V=2.74W 220V=2.69W |
Heat dissipation (BTU/hour) | 9,34 |
Ecological (energy efficiency) | Supports IEEE 802.3az on all Gigabit Ethernet copper ports |
Compliance/certifications | UL (UL 60950), CSA (CSA 22.2), CE Mark, FCC Part 15 (CFR 47) Class A, FCC Class B |
Operating temperature | 32° to 104°F (0° to 40°C) |
Storage temperature | -4° to 158°F (-20° to 70°C) |
Humidity during operation | 10% to 90%, relative, non-condensing |
Storage Humidity | 5% to 90%, relative, non-condensing |
Acoustic noise and mean time between failures (MTBF) | 4,243,002 hours |
Unfortunately, the Cisco CBS110-5T-D does not support PoE power.