The Cisco Nexus® 3064-X switch is a high-performance Ethernet switch that is part of the Cisco Nexus 3000 Series switch family.This compact 10-gigabit Ethernet switch with a 1RU form factor provides Level 2 and Level 3 switching at line rate
Cisco Nexus 3064-X switches are ideal for data centers that require cost-effective, energy-efficient top Level 2 AND 3 (ToR) switches with line rate.
| Features / filters | |
| LAN standard | 10 Gigabit Ethernet |
| Number of LAN ports | 48x [10G (SFP+)], 4x [40G (QSFP)], |
| Management | CLI - Command Line Interface, By web browser, |
| Switching layer | 2, 3, |
| Type of case | Rack (1U) |
| Technical data | |
| Physical | 1U fixed form factor 48 SFP ports support 1 and 10 gigabit local area networks 4 QSFP ports support 4 x 10 gigabit Ethernet or 40 gigabit Ethernet each 2 redundant power supplies 1 fan pallet with redundant fans 1 I/O module with management, console, and USB flash drive ports |
| Performance | Routing / Switching Capacity 1.28-Tb/s Forwarding rate 950 m/s Linear traffic throughput (as Level 2 and Level 3) on all ports Configurable Maximum Transmission Unit (MTU) up to 9216 bytes (elephant frames) |
| Table hardware and scalability | |
| MAC addresses | 128000 |
| Number of VLANs | 4096 |
| The speeches by sta | Rapid Spanning Tree Protocol (RSTP): 512 Multiple Spanning Tree Protocol (MST): 64 |
| ACL entries | Entry 2000 1000 exits |
| Route Table | 16,000 prefixes and 16,000 host records 8,000 broadcast routes |
| Number of live channels | 64 (with vPC) |
| Number of ports per EtherChannel | 32 |
| Buffers | 9 MB general public |
| Flash memory encoder | 2 GB |
| Power | |
| Number of power sources | 2 (provisioning for ac and dc power) |
| Types of power sources | Alternating current (direct and reverse airflow) Direct current (forward and reverse airflow) |
| Typical operating power | 143 W (64p with Twinax at 100% load; 2 power supplies [GC]) 177 W (64p with SR-optics at 100% load; 2 power supplies) |
| Maximum power | 199W |
| Power supplies ac | Input voltage: 100 to 240 v AC Frequency: 50 to 60 Hz Efficiency: 89 to 91% at 220 W |
| DC power supplies | Input voltage: -40 to -72 W dc Maximum current: 33A Efficiency: 85 - 88% |
| Typical heat emission | 488 BTU / hr (64p with Twinax at 100% load; 2 power supplies) 605 BTU / hr (64p with SR optics at 100% load; 2 power supplies) |
| Maximum heat dissipation | 683 BTU/hour |
| Cooling | |
| Straight and reverse airflow diagram: | Direct airflow: port side exhaust (air enters through oil fan and power source and exits through ports) Return airflow: port side inlet (air enters through ports and exits through fan oil and power source) |
| Environment | |
| Dimensions (height x width x depth) | 17.2 mm x 173 mm x 197 mm |
| Weight | 9,3 kg |
| Operating temperature | 32 to 104°F (0 to 40°C) |
| Storage temperature | -40 to 158°F (-40 to 70°C) |
| Working relative humidity | 10 to 85% noncondensing Up to 5 days at maximum (85%) humidity I recommend ASHRAE data center environment |
| Relative humidity during storage | 5 to 95% noncondensing |
| Height | 0 to 10,000 ft (0 to 3000m) |
| Software functions | |
| Specification | |
| Layer 2 | Layer 2 switching ports and VLAN trunks IEEE 802.1 Q VLAN encapsulation Supports up to 4096 VLANs Rapid Per - VLAN Spanning Tree Plus (PVRST+) (IEEE 802.1 w) Multiple Spanning Tree Protocol( MSTP) (IEEE 802.1 s): 64 instances Spanning Tree PortFast Tree Root Guard Spanning Tree Bridge Security Cisco EtherChannel Technology (up to 32 ports per EtherChannel) Link Aggregation Control Protocol (LACP): IEEE 802.3 ad Advanced PortChannel hashing based on Layer 2, 3, and 4 information vPC Jumbo frames on all ports (up to 9216 bytes) Storm control (unicast, multicast and broadcast) Private VLANs |
| Layer 3 | Layer 3 interfaces: port forwarding on interfaces, switch Virtual Interfaces( SVIs), port channels and subinterfaces (total: 1024) 64 Directional ECMP 2000 inputs and 1000 inputs ACL IPv6 Routing: static, OSPFv3 and BGPv6 Routing protocols: Static, RIPv2, EIGRP, OSPF and BGP Bidirectional flow detection (BFD) for BGP, OSPF and ipv4 static routes HSRP and VRRP ACL: redirected ACL with layer 3 and 4 options to match ingress and egress ACLs VRF: VRF-lite (IP VPN), VRF-aware unicast (BGP, OSPF and RIP) and VRF-aware multicast Unicast Reverse-Path Forwarding (uRPF) with ACL; strict and loose modes Jumbo frame support (up to 9216 bytes) Generic Routing Encapsulation (GRE) tunneling |
| Multicast | Multicast: PIMv2, PIM-SM and SSM Router Bootstrap (BSR), Auto-RP and Static RP Multicast Source Discovery Protocol (MSDP) and Anycast RP Internet Group Management Protocol (IGMP) Versions 2 and 3 |
| Quality of Service (QoS) | Layer 2 IEEE 802.1 p (Class of Service [CoS]) 8 hardware queues per port QoS configuration per port CoS trust Port-based CoS allocation Modular QoS CLI (MQC) compliance ACL-based QoS classification (Layer 2, 3 and 4) MQC CoS Marking Differentiated Service Code Point (DSCP) Marking Weighted Random Early Detection (WRED) CoS-based egress queuing Egress strict priority queuing Egress port-based scheduling: Weighted Round-Robin (WRR) Explicit Congestion Notification (ECN) Configurable ECN (marking) per port |
| Security | Ingress ACLs (standard and extended) on Ethernet Standard and extended Layer 3 to 4 ACLs include IPv4, Internet Control Message Protocol (ICMP), TCP, and User Datagram Protocol (UDP) VLAN-based ACLs (VACLs) Port-based ACLs (PACLs) Named ACLs ACLs on virtual terminals (vtys) DHCP snooping with option 82 Port number in DHCP option 82 DHCP Relay Dynamic Address Resolution Protocol (ARP) control Configurable CoPP |
| Cisco Nexus Data Broker | Topology support for tap and SPAN aggregation QinQ port support for tap and span input source tag Traffic load balancing with multiple monitoring tools Filtering of traffic based on Layer 1 to Layer 4 header information Traffic replication and forwarding to multiple monitoring tools Robust RBAC Representational State Transfer (REST) API for all programmability support functions |
| Management | POAP Python scripting Cisco EEM Manage switches using 10/100/1000 Mbps ports or console CLI-based console for detailed out-of-band management In-band switch management Location and notification lights Configuration rollback SSHv2 Secure Copy Server (SCP) Telnet AAA AAA with RBAC Radius TACACS+ Syslog Syslog generation on system resources (e.g. FIB tables) Built-in packet analyzer SNMP v1, v2 and v3 Enhanced SNMP MIB support XML support (NETCONF) Remote monitoring (RMON) Advanced Encryption Standard (AES) for traffic management Unified user name and password for CLI and SNMP Microsoft Challenge Handshake Authentication Protocol (MS-CHAP) Digital certificates for management between the switch and RADIUS server Cisco Discovery Protocol versions 1 and 2 RBAC Switched Port Analyzer (SPAN) on physical layer, PortChannel, and VLAN Tunable buffer allocation for range Encapsulated Remote SPAN (ERSPAN) Ingress and egress packet counters per interface PTP Limit Timer (IEEE 1588) Network Time Protocol (NTP) Cisco OHMS Comprehensive bootup diagnostic tests Cisco Call Home Cisco dcnm Advanced buffer usage monitoring sFlow |
| Data sheet | Download |
