EN

Cisco SG110D-08HP | PoE Switch | 8x 1000Mb/s, 4x PoE 802.3af, Desktop

CODE: SG110D-08HP-EU / EAN: 0882658722400

Cisco SG110D-08HP | PoE Switch | 8x 1000Mb/s, 4x PoE 802.3af, Desktop

CODE: SG110D-08HP-EU / EAN: 0882658722400
72,20 GBP without VAT (net)
Out of stock
Number of LAN ports: 8x [10/100/1000M (RJ45)]
Number of PoE ports: 4x [802.3af/at (1G)]
Number of WAN ports: Not applicable
Show more parameters

About product

Cisco SG110D-08HP - unmanageable 8-port Gigabit switch with PoE power supply function

The SG110D-08HP model is an eight-port switch with a maximum throughput of 1000 Mb/s per port. The switch belongs to series 110 Cisco Small Business and is designed for use in homes or small offices. The model is additionally equipped with 4 RJ45 ports, which support power transmission via Ethernet cable compliant with PoE 802.3af standard. The total power to be supplied via PoE is 32 W. The switch does not require configuration and is ready to use after taking it out of the package. The device is equipped with many automatic technologies, including built-in QoS (Quality of Service) functions, which automatically give higher priority to video and audio data.

Quiet operation and high performance

The switch is designed to reduce energy consumption, offering low power consumption without loss of efficiency. Fanless design makes the unit run quietly, discreetly. Each port of the switch independently sets the optimum speed and automatically selects the half-duplex or full-duplex operation.

Cisco 110 series switches - inexpensive, easy to use, no configuration required

Increase the speed and efficiency of your office network at low cost and without wasting time on set-up. With Cisco switches you can easily build a highly reliable network to connect computers, printers, copiers and other office equipment. An efficient and reliable business-class office network that simply works right out of the box with the unmanaged Cisco® 110 switches.

The 110 series Switches Cisco enable basic network connectivity for small businesses, providing all the features and expandability. These switches provide the reliability you expect from Cisco. They work immediately, without installation software, without the need for configuration. Simply connect the switch and your computers or other business equipment and get down to work.

The Cisco 110 series is part of Cisco Small Business network solutions. It is a line of unmanageable switches providing Fast Ethernet and Gigabit Ethernet (SG series) connectivity. There are models available for desktop or rack-mounting. The devices are designed to meet basic network needs and optimize energy efficiency. They use less energy, providing the robust, failure-free connectivity required by businesses. The 110 series switches are a business-class network solution at an affordable price. They confirm the reliability that characterizes Cisco products.

Features of 110 Cisco series switches

Ease of use - the switches work right out of the box, without having to install software and configure. Each switch port is independently set to the optimal speed and automatically decides whether to work in half-duplex or full-duplex mode. Cisco switches are designed to support 10 Mb/s, 100 Mb/s and up to 1 Gb/s (SG series) devices on the same network. They automatically detect the type of network cable used, so you should not worry about using the wrong one. They are compatible with network devices from other manufacturers.

Easy installation - Designed for small office spaces, the Cisco 110 series switches are available in both compact wall-mounted and rack-mounted desktop enclosures.

High Performance - Cisco products feature performance that is essential for business applications such as video services that require high bandwidth and no network latency. The devices support Gigabit Ethernet (SG Series) speed, unlocking new levels of bandwidth and performance on the business network and enabling large file transfers in seconds.

Reduced energy consumption - the 110 series switches are designed to save energy by optimizing energy consumption without sacrificing efficiency. They support the Energy Efficient Ethernet standard (IEEE 802.3az), which reduces energy consumption by monitoring traffic on the active link and putting the link to sleep mode when not in use. Most switches do not have fans, which results in their silent operation and further reduces energy costs.

High-tech support - each switch is equipped with advanced motion control features to ensure maximum performance. The integrated QoS intelligence on all models automatically prioritizes delay-sensitive services such as voice or video services to increase network performance. By detecting unintentionally created loops, you avoid collisions of devices that could cause a network to stop. Cable diagnostics allows quick identification and resolution of network cabling problems. Fast store-and-forward switching identifies damaged packets and prevents them from passing through the network. All these functions work automatically, without the need for management or configuration.

Faultlessness - high quality workmanship and reliability are the features you should expect from Cisco devices. The equipment has been rigorously tested to meet customer expectations and guarantee optimal uptime and performance. The product has a limited lifetime warranty.

Power over Ethernet (PoE) - The 110 Series offers models with PoE ports for both Fast Ethernet and Gigabit Ethernet devices. This feature simplifies the deployment of IP telephony, wireless systems, and video surveillance, allowing network endpoints to be connected and powered via a single Ethernet cable. There is also no need to install separate power supplies for network devices, so advanced communication technologies can be deployed faster and cheaper.

Specification

Features / filters
LAN standard Gigabit Ethernet 10/100/1000 Mb/s
Number of LAN ports 8x [10/100/1000M (RJ45)]
Number of PoE ports 4x [802.3af/at (1G)]
Number of WAN ports Not applicable
10G support No
Auto MDI/MDI-X Yes
Basic switching RJ-45 Ethernet ports quantity 8
Basic switching RJ-45 Ethernet ports type Gigabit Ethernet (10/100/1000)
Built-in modem None
Certification UL (UL 60950), CSA (CSA 22.2), CE, FCC 15 (CFR 47) A, FCC B
Copper ethernet cabling technology 1000BASE-T,100BASE-TX,10BASE-T
DC input voltage 48
Depth 129
Ethernet LAN data rates 10,100,1000
Flow control support Yes
Forwarding rate 11.9
Full duplex Yes
Gigabit Ethernet (copper) ports quantity 8
Harmonized System (HS) code 85176990
Head-of-line (HOL) blocking Yes
Height 30
Input current 1.25
Input voltage 48
Jumbo frames 9216
Jumbo frames support Yes
LED indicators Yes
Management No
Networking standards IEEE 802.1p,IEEE 802.3,IEEE 802.3ab,IEEE 802.3af,IEEE 802.3az,IEEE 802.3u,IEEE 802.3x
Number of queues 4
Operating relative humidity (H-H) 10 - 90
Operating temperature (T-T) 0 - 40
Power (W) 32
Power over Ethernet (PoE) Yes
Power over Ethernet (PoE) ports quantity 4
Power supply included Yes
Product colour Black
Quality of Service (QoS) support Yes
Quick start guide Yes
Rack mounting No
Storage relative humidity (H-H) 5 - 90
Storage temperature (T-T) -20 - 70
Switch layer L2
Switch type Unmanaged
Switching capacity 16
Switching layer 2
Type of case Desktop
Web-based management No
Weight 510
Width 160

Technical parameters - model SG110D-08HP

Basic technical parameters
Cabling Category 5e or higher
Supported standards IEEE 802.3 10BASE-T Ethernet, IEEE 802.3u 100BASE-TX Fast Ethernet, IEEE 802.3ab 1000BASE-T Gigabit Ethernet, IEEE 802.3z Gigabit Ethernet, IEEE 802.3x Flow Control, 802.1p priority, Energy Efficient Ethernet, 802.3af, Power over Ethernet
LED lights System/PWR, link/activity, 100M,*PoE, *mMax PoE, cable diagnostics, loop detection, *gigabit, *mini-GBIC
(*if the switch is equipped with this port)
Physical interfaces
Ports 8 ports RJ-45 10BASE-T/100BASE-TX/1000BASE-T
Power supply DC 48 V, 1.25 A
Socket Kensington Castle Nest
Physical dimensions (W x D x H) 160 mm x 30 mm x 128.5 mm
Weight 0.55 kg
Power over Ethernet (PoE) 4 Gigabit PoE ports with 802.3af support, PoE power 32 W
Fan None
Performance
Switching capacity 16 Gb/s
Capacity 11.9 mpps (based on 64-byte packages)
Functions
Head-of-line (HOL) Prevention of HOL blocking
Jumbo frame 9216 bytes
Quality of service (QoS) 802.1p, 4 queues, priority and CSF
Loop detection Helps to detect loops in the network
Cable diagnostics Quick identification and troubleshooting of network cables and/or short circuits
Installation and protection
Mounting options Desktop
Physical security lock Kensington Castle Nest
Environmental features
Certificates of conformity UL (UL 60950), CSA (CSA 22.2), CE, FCC Part 15 (CFR 47) Class A, FCC Class B*
(*selected models)
Operating temperature 0°C to 40°C (32°F to 104°F)
Storage temperature -20°C to 70°C (-4°F to 158°F)
Ambient humidity 10% to 90%, relative, non-condensing
Humidity during storage 5% to 90%, relative, non-condensing
System memory 128-MB RAM
128-MB Flash
Package contents Cisco Switch 110 series
Power cable/mains adapter
Operating instructions
Mounting accessories

Support

Downloads:

Cisco 110 series Datasheet - ENG Download
Cisco 110 series - short instruction manual - ENG Download

72,20 GBP without VAT (net)
Out of stock
Print version
Session will expire in:
Seconds
You will be logged out after the session expires
Choose a different country or region to shop in the language that suits you
Our site uses cookies (so-called "cookies"). You can find more about these files, as well as about how we process your personal data, in our privacy policy.
You are on page for country / region:
English (EN)
Please select a different country or region to shop in a language that suits you.