EN

Cisco SG350XG-24F | Switch | 22x SFP+, 2x 10G Combo(RJ45/SFP+), Stackable

CODE: SG350XG-24F-K9-WS

Cisco SG350XG-24F | Switch | 22x SFP+, 2x 10G Combo(RJ45/SFP+), Stackable

CODE: SG350XG-24F-K9-WS
1552,39 GBP without VAT (net)
Out of stock

About product

Cisco SG350XG-24F - 24-Port 10 Gigabit SFP+ Switch with 10 Gb/s SFP+/RJ45 Combo Uplink Ports with Stackable Managed Switch - Cisco 350X Series

Cisco SG350XG-24F switch is equipped with 22 SFP+ ports with 10 Gbps through put and 2 RJ45/SFP+ 10G combo uplink ports. Management and configuration of Cisco switches includes a graphical user interface accessible through a web browser and a text-based CLI console.

327526_1.jpg

Performance at the highest level

The switch features a throughput of 357.12 million packets per second (64-byte packets) and a switching capacity of 480 Gbps. The Cisco switch is covered by a limited lifetime manufacturer's warranty.

Cisco 350X Series

Cisco® 350X series - is a line of managed Ethernet switches at a very affordable price. The devices offer a wide range of functions necessary to support demanding network environments, are easy to implement and manage, and do not require support from numerous IT staff.

Physical stacking of switches

Unlike stackable switches that have components but are separately administered and diagnosed, the Cisco 350X Series provides true end-to-end switch stacking, allowing multiple switches to be configured, managed, and troubleshooted as if they were a single device, making network expansion much easier. The 350X Series allows up to 4 switches and up to 208 manageable ports to be combined into a single stacked system.

Series350x.jpg

Why Cisco? Features and benefits of the 350X series switches

The Cisco 350X Series Switches offer growing businesses an advanced and complete feature set and all the necessary applications and technologies for high throughput. The switches ensure reliability of key features, protect sensitive business information, and optimize network bandwidth for the most efficient transfer of data across the network.

350X Series Switches - Key Features

- The high-performance Cisco 350X Series 10 Gigabit Ethernet Switches enable wired Ethernet speeds of up to 10 Gbps, providing suitable and sufficient performance for growing networks in small and medium-sized businesses.
- Multi-Gigabit Performance - While traditional Ethernet infrastructures can only support speeds up to 1 Gigabit per second (Gbps), the 350X Series switches allow you to exceed this barrier.
- Easy setup and management - Cisco 350X Series switches are designed to be easy to use and manage.
- Power over Ethernet Plus (PoE+) and 60 W Po E - PoE technology simplifies the deployment of IP phones and wireless access points by allowing network endpoints to be connected and powered over a single Ethernet cable, without the need to install separate power supplies. The 350X Series switches support 15W Power over Ethernet (PoE) and 30W Power over Ethernet Plus (PoE+). They also support 60W Po E on select ports to power compact switches, wireless access points or other power-hungry devices.
- High Reliability and Robustness - Stackable switches play an important role in eliminating downtime and improving network resiliency. If a stacked Cisco 350X Series switch fails, another switch immediately takes over, keeping the network up and running.
- True Stacking - Cisco 350X Series switches provide physical switch stacking, allowing you to troubleshoot, configure, manage multiple physical switches on a single device, with a single IP address, this applies to up to 4 devices and up to 208 ports.
- Strong security - Cisco 350X series switches provide advanced security features that are essential to protect business data and prevent unauthorized users from accessing the network.
- IPv6 support - Cisco 350X Series switches have passed rigorous IPv6 testing and have received USGv6 and IPv6 Gold certification.
- Advanced Layer 3 traffic management - The switches support Layer 3 static LAN routing, allowing you to partition your network into workgroups and communicate in VLANs without compromising application performance. These features can improve network performance by offloading internal traffic management tasks from the router and allowing it to primarily manage external traffic and network security.
- Energy Efficiency - The switches are designed to save energy by optimizing power consumption, helping to protect the environment and reduce energy costs.
- Networkwide Automatic Voice Deployment - Using Cisco Discovery Protocol, LLDP-MED, Auto Smartports, and Voice Services Discovery Protocol (VSDP - a unique Cisco protocol), customers can dynamically deploy an end-to-end voice network.










327526_2.jpg

Specification

Features / filters
LAN standard 10 Gigabit Ethernet
Number of LAN ports 22x [10G (SFP+)] , 2x [10G Combo (RJ45/SFP+)] ,
Management CLI - Command Line Interface, By cloud – cloud management, By web browser,
Stacking possible Yes
Switching layer 2, 3,
Type of case Rack (1U)

Product specification - Model SG350XG-24F

Performance - switching capacity and data rate
Throughput in Mpps (64-byte packets) 357.12
Switching capacity (Gbps) 480
PoE (Power over Ethernet) The switches support 802.3at PoE+, 802.3af PoE, and Cisco pre-standard (legacy) PoE on any RJ45 network port. 60 W PoE on select RJ-45 network ports is also supported, with a maximum of 60 W delivered to any of the PoE ports at 60 W, and a maximum of 30 W delivered to any of the other RJ45 network ports until the PoE budget for the switch is reached. The total power available for PoE for the switch is as follows:
Power dedicated for PoE No
Number of PoE-capable ports No
Energy consumption
Green Power EEE, Energy Detect, Short Reach
Energy consumption of the system 77.5 W
Power consumption (with PoE) N/A
Heat distribution (BTU/hour) 264.44
Ports
Total number of ports 22 x 10 Gigabit SFP+, 2 x Combo 10G RJ45/SFP+,
1x GE OOB management port
LAN ports 22 x 10 Gigabit SFP+
Uplink ports 2 x 10GE RJ45/SFP+ Combo
Packet buffer 2 MB
Product specifications
Jumbo frames Frame sizes up to 9K bytes
Default MTU is 2K
MAC table Up to 16K (16384) MAC addresses
Console port Cisco Standard console port - RJ45
OOB management port Dedicated gigabit port for out-of-band management on SG350XG models
USB connector USB type A socket on the front panel of the switcher makes it easy to manage files and images
Buttons Reset button
LEDs System, master, stack ID, link/speed per port
Flash Memory 256 MB
CPU 800 MHz (dual-core) ARM
CPU memory 512 MB
Environmental features
Device dimensions (W x H x D) 440 mm x 44 mm x 350 mm
Weight 4.16 kg
Power supply 100 - 240 V, 47 - 63 Hz, internal
Certification UL (UL 60950), CSA (CSA 22.2), CE mark, FCC Part 15 (CFR 47) Class A
Operating temperature 0°C to 50°C
Storage temperature -20°C to 70°C
Operating humidity 10% to 90%, relative, non-condensing
Storage Humidity 10% to 90%, relative, non-condensing
Acoustic noise level and mean time between failures (MTBF)
Fan (number) 4
Acoustic noise 0°C to 25°C: 36.4 dB
MTBF at 50°C (hours) 194544
Warranty
Warranty Limited lifetime warranty
Contents of the package Cisco Small Business 350X Series Switch
Power Cable
Installation kit
Console cable
Quick user guide
Layer 2 switching
Spanning Tree Protocol 802.1d Spanning Tree support
Rapid convergence using 802.1w (Rapid Spanning Tree [RSTP]), enabled by default
8 instances are supported
Multiple Spanning Tree instances using 802.1s (MSTP)
Port Grouping and Link Aggregation Support for IEEE 802.3ad Link Aggregation Control Protocol (LACP)
up to 8 groups
up to 8 ports per group with 16 candidate ports for each aggregated 802.3ad LAG dynamic link
VLAN Supports up to 4096 VLANs simultaneously
VLANs based on 802.1Q ports and tags
MAC-based VLANs
VLAN Management
Private VLAN Edge (PVE), also known as protected ports, with multiple uplinks
Guest VLAN
Unauthenticated VLAN
Dynamic VLAN assignment via RADIUS server with 802.1x client authentication
CPE VLAN
Voice VLAN Voice traffic is automatically assigned to a voice-specific VLAN and processed using the appropriate voice QoS Auto feature levels
Multicast TV VLAN Multicast TV VLAN enables a single multicast VLAN to be shared across a network, while subscribers remain in separate VLANs (also known as MVRs)
Q-in-Q VLAN VLANs transparently intersect the service provider network while isolating traffic among clients
Generic VLAN Registration Protocol (GVRP)/Generic Attribute Registration Protocol (GARP) Protocols for automatic propagation and configuration of VLANs in a bridged domain
Unidirectional Link Detection (UDLD) UDLD monitors the physical connection to detect unidirectional connections caused by improper cabling or cable/port faults to prevent forwarding loops and block traffic in networks
DHCP relay in Layer 2 Forwarding of DHCP traffic to DHCP server in different VLANs; works with DHCP option 82
Internet Group Management Protocol (IGMP versions 1, 2, 3) snooping IGMP limits bandwidth-intensive multicast traffic to requesters only; supports up to 1K multicast groups (source-specific multicasting is also supported)
IGMP querier Querier IGMP is used to support the Layer 2 multicast domain of snooping switches in the absence of a multicast router
HOL (Head-Of-Line) locking Prevention of HOL locks
Layer 3 functions
IPv4 Routing Forwarding of IPv4 packets at wire-speed
Up to 8K static routes and up to 256 IP interfaces
Static IPv6 routing at wire speed Up to 4K static routes and up to 200 IPv6 interfaces
Layer 3 interface Layer 3 interface configuration on a physical port, LAG, VLAN interface or loopback interface
Classless inter-domain routing (CIDR) CIDR support
DHCP server The switch acts as an IPv4 DHCP server supporting IP addresses for multiple DHCP pools/scopes
Supports DHCP options
DHCP relay at Layer 3 Forwarding of DHCP traffic between IP domains
User Datagram Protocol (UDP) relay Forward transmission information between Layer 3 domains for application discovery or bootP/DHCP packet forwarding
Stacking - connecting switches into stacks
Hardware stacking Up to 4 switches in a stack, up to 208 ports managed as a single system with hardware failover
Protection during machine failure High-speed stack failover for minimal network traffic loss
Supports link aggregation between multiple units in a stack
Plug and Play configuration/management Master/backup for flexible stack control
Automatic numbering
Hot Swap of units in a stack
Ring and chain stacking options, automatic stacking port speed, flexible port options
High-speed connections between stacks Cost-effective, high-speed 10G fiber and copper interfaces
LAG support for interconnects for even greater bandwidth
Security
Secure Shell Protocol (SSH) SSH is a secure replacement for Telnet traffic
SCP also uses SSH
SSH v1 and v2 are supported
Secure Sockets Layer (SSL) SSL support: encrypts all HTTPS traffic, enabling highly secure access to the switch's browser-based graphical management interface
IEEE 802.1X (authenticator role) 802.1X: RADIUS authentication and reporting
MD5 checksum
Guest VLAN
Unauthenticated VLAN
Single/multiple host mode and single/multiple sessions
Supports 802.1X time-based support
Dynamic VLAN assignment
Authorization via Internet Web-based authentication provides web-based access control via a web browser to any device and operating system
STP Bridge Protocol Data Unit (BPDU) Guard A security mechanism that protects the network against incorrect configurations
BPDU Guard enabled port is disabled if a BPDU message is received on that port, avoiding accidental topology loops
STP Root Guard This prevents edge devices not under network administrator control from becoming Spanning Tree Protocol root nodes
DHCP snooping Filters DHCP messages with unregistered IP addresses and/or from unexpected or untrusted interfaces
This prevents malicious devices from acting as DHCP servers
IP Source Guard (IPSG) When IP Source Guard is enabled on a port, the switch filters IP packets received from the port if the source IP addresses of the packets have not been statically configured or dynamically learned from DHCP snooping
This prevents IP address spoofing
Dynamic ARP Inspection (DAI) The switch discards ARP packets from a port if there are no static or dynamic IP/MAC bindings, or if there is a discrepancy between the source or destination addresses in an ARP packet
This prevents man-in-the-middle attacks
IP/MAC/Port Binding (IPMB) Previous features (DHCP Snooping, IP Source Guard and Dynamic ARP Inspection) work together to prevent DOS attacks on the network, thereby increasing network availability
Secure Core Technology (SCT) Ensures that the switch will receive and manage process and protocol traffic regardless of the amount of traffic received
Secure Sensitive Data (SSD) A mechanism for securely managing sensitive data (such as passwords, keys, etc.) on the switch, populating this data in other devices and protecting against autoconfiguration
Access to view sensitive data in plaintext or encrypted form is provided according to the access level configured by the user and the user access method
Private VLAN Private VLAN provides security and isolation between switching ports so that users cannot spy on other users' traffic; supports multiple uplinks
Port security Ability to block source MAC addresses to ports and limit the number of learned MAC addresses
RADIUS/TACACS+ Supports RADIUS and TACACS authentication
The switch operates as a client
RADIUS accounting RADIUS reporting features allow you to send data at the beginning and end of a service, indicating the amount of resources (such as time, packets, bytes, etc.) used during the session
Protection against thunderstorms Broadcast, multicast and unknown unicast
DoS prevention Prevention of Denial-Of-Service (DOS) attacks
Multiple user privilege levels in CLI Allowance levels 1, 7 and 15
ACL access control lists Support for up to 2000 policies
Packet rejection or bandwidth limiting based on source and destination MAC, VLAN ID or IP address, protocol, port, DSCP/IP precedence, TCP/UDP source and destination ports, 802.1p priority, Ethernet type, Internet Control Message Protocol (ICMP) packets, IGMP packets, TCP flag, time-based ACL supported
Quality of Service
Priority levels 8 hardware queues
Schedules Strict Priority and Weighted Round-Robin (WRR)
Classes of service Port-based; 802.1p VLAN priority-based; IPv4/v6 IP precedence/Type of Service (ToS)/DSCP-based; Differentiated Services (DiffServ); classification and remarking ACLs, trusted QoS
Queue assignment based on Differentiated Services Code Point (DSCP) and class of service (802.1p/CoS)
Rate limiting Ingress policer; outbound traffic control and rate control; per VLAN, per port and based on data flow, 2R3C policies
Avoiding traffic congestion A TCP congestion avoidance algorithm is required to minimize and avoid global synchronization TCP losses
IPv6
IPv6 IPv6 host mode
IPv6 over Ethernet
Dual stack IPv6/IPv4
IPv6 Neighbor and Router Detection (ND)
IPv6 stateless address autoconfiguration
Path Maximum Transmission Unit (MTU) discovery
Double Address Detection (DAD)
ICMP Version 6
IPv6 over IPv4 network with Intrasite Automatic Tunnel Addressing Protocol (ISATAP) support
USGv6 and IPv6 Gold Logo Certification
IPv6 QoS Prioritizing IPv6 packets
IPv6 ACL Rate limiting or discarding IPv6 packets
IPv6 First Hop Security RA guard
ND inspection
DHCPv6 guard
Neighbor table (snooping and static entries)
Neighbor binding integrity check
Multicast listener discovery (MLD v1/2) snooping Deliver IPv6 multicast packets only to appropriate recipients
IPv6 applications Web/SSL, Telnet server/SSH, ping, traceroute, Simple Network Time Protocol (SNTP), Trivial File Transfer Protocol (TFTP), SNMP, RADIUS, syslog, DNS client, Telnet Client, DHCP Client, DHCP Autoconfig, IPv6 DHCP Relay, TACACS
Management
Graphical user interface Built-in switch configuration utility for easy device configuration in a browser (HTTP/HTTPS)
Supports simple and advanced operation, configuration, wizards, configurable dashboard, system maintenance, monitoring, online help and universal search engine
Smart Network Application (SNA) Smart Network Application (SNA) is an innovative network-level monitoring and management tool built into Cisco 100 to 500 series switches
It can detect network topology, display link status, monitor events, apply configurations, and update software images across multiple switches in the network
(Note: Network management with Smart Network Application requires a 350, 350X, or 550X series switch as part of the network)
SNMP SNMP versions 1, 2c and 3 with SNMP trap support and SNMP version 3
User-based security model (USM)
Remote monitoring (RMON) Built-in RMON software supports 4 RMON groups (history, statistics, alarms and events) for better traffic management, monitoring and analysis
Dual stack IPv4 and IPv6 Coexistence of both protocol stacks to facilitate migration
Firmware Update Upgrade via web browser (HTTP/HTTPS) and TFTP and SCP
Update can also be initiated via console port
Dual images for flexible firmware updates
Port mirroring Traffic on a port or LAG can be mirrored to another port for analysis using a network analyzer or RMON probe
Up to 8 source ports can be mirrored to a single destination port
VLAN mirroring Traffic on a port can be mirrored to another port for analysis using a network analyzer or RMON probe
Up to 8 source ports can be mirrored to a single destination port
Single session is supported
Flow-based redirection and mirroring Redirect or mirror traffic to a destination port, or mirror session based on flow
Remote Switch Port Analyzer (RSPAN) Traffic can be mirrored through the Layer 2 domain to a remote port on another switch for easy troubleshooting
sFlow agent The switch can export the sFlow sample to external collectors
sFlow provides visibility of network traffic to the flow level
DHCP (options 12, 66, 67, 82, 129 and 150) DHCP options allow tighter control from a central point (DHCP server) for IP address, auto-configuration (with configuration file download), DHCP relay and hostname
Self-configuration with Secure Copy (SCP) Enables secure, mass deployment with protection for sensitive data
Text-based, editable configuration files Configuration files can be edited with a text editor and downloaded to another switch, facilitating mass deployment
Smartports Simplified configuration of QoS and security features
Auto Smartports Applies intelligent solutions provided through Smartport roles and applies them automatically to the port based on devices discovered using Cisco Discovery Protocol or LLDP-MED
Secure copy (SCP) Secure file transfer to and from the switch
Text-based CLI command line Scriptable CLI
Full CLI and menu CLI supported
Cloud services Support for Cisco Active Advisor
Temporary operation of the port Raise or lower the port based on a user-defined schedule (when the port is administratively raised)
Other forms of management Traceroute; Single IP Management; HTTP/HTTPS; SSH; RADIUS; Port Mirroring; TFTP Update; DHCP Client; Simple Network Time Protocol (SNTP); Xmodem Update; Cable Diagnostics; Ping; Syslog; Telnet Client; SSH Client; Automatic Time Setting from Management Station
Energy efficiency
Energy detection The switch automatically shuts down power to the RJ-45 port when no connection is detected
Power is resumed without packet loss when the switch detects a connection
Cable length detection Adjusts signal strength according to cable length, reduces power consumption for shorter cables
EEE (802.3az) compliant 802.3az support on all 10 Gbps copper ports
Disabling the port LEDs LEDs can be manually switched off to save energy
Discovery
Bonjour The switch is broadcasting with Bonjour protocol
Link Layer Discovery Protocol (LLDP) (802.1ab) with LLDP-MED extensions LLDP enables a switch to broadcast its identification, configuration, and capabilities to neighboring devices that store data in the MIB
LLDP-MED is an extension to LLDP that adds extensions needed for IP phones
Cisco Discovery Protocol The switch broadcasts using Cisco Discovery Protocol, it also learns the connected device and its properties using Cisco Discovery Protocol

Support

Downloads:

Cisco 350X Administration Guide - ENG Download
Cisco 350X Series Quick Start Guide - ENG Download
Cisco Series 350X Datasheet - ENG Download
Cisco 350XG Series Quick Start Guide - ENG Download
1552,39 GBP without VAT (net)
Out of stock
Print version
Session will expire in:
Seconds
You will be logged out after the session expires
Choose a different country or region to shop in the language that suits you
Our site uses cookies (so-called "cookies"). You can find more about these files, as well as about how we process your personal data, in our privacy policy.
You are on page for country / region:
English (EN)
Please select a different country or region to shop in a language that suits you.