EN
The DEM-310GT Gigabit SFP Singlemode Fiberic Module is designed to fit into the SFP (Small Form-Factor Pluggable) port of a network device to receive and transmit data over fiber optic cables. The small form-factor pluggable module provides fast, reliable transmission over long distances up to 10 kilometers using 1310 nm wavelength and is easy to install.
The DEM-310GT uses a standard duplex connector (LC connector) to connect fiber optic cables. It meets industry standards and is compatible with D-Link Gigabit switches. All D-Link modules support hot plug functionality. Connecting the module to a powered device will not cause any problems. This allows you to plug or unplug a module without interrupting the rest of your network, making maintenance easier and significantly reducing downtime.
Features / filters | |
Transmission distance | 4-20km |
Hardware features | |
Interfaces | 1 port 1000Base-LX |
Type of aspect ratio | SFP |
Connector | Duplex LC |
Unidirectional / bidirectional | One-way |
Supports fiber optic cable | Single-mode |
Standards | IEEE 802.3z 1000Base-LX |
Data transmission distance | 10 km |
Data transmission speed | 1.25 Gbit/s |
Wavelength | 1310 nm |
Receiver operating wavelength | 1260 nm - 1610 nm |
Optical Power Output (Tx) | Max: -3 dBm Min: -9 dBm |
Input optical power (Rx) | Max: -3 dBm Min: -22 dBm |
Sensitivity | 22 dBm |
Cable type | Single-mode optics 9/125 μm |
Supported functions | Hot plugging MSA compliant RoHS compliant |
Physical parameters | |
Dimensions (L x W x H) | 55.4 mm x 13.7 mm x 8.5 mm |
Working conditions | |
Power supply | 3,3 V |
Max. input current | 220mA |
Temperature | Operation: 0 to 70 °C Storage: -40 to 85 °C |
Humidity | Operating: 0% to 85%. In storage: 0% to 85%. |