EN
The D-Link DEM-CB100S cable is an indispensable and simple tool that allows you to connect network switches and thus expand the existing capabilities of your local network, which is especially important as the number of electronic devices in your system increases. This cable can directly connect switches with 10G ports over a distance of up to 1 meter.
The D-Link DEM-CB100S has a handy SFP connector made with shielding technology. This means that this cable is protected against electromagnetic interference and is highly resistant to aggressive external factors. Information via this cable will be transmitted without distortion, and the impact of electromagnetic interference, which inevitably occurs when other electronic devices are operating, will be minimized. Biaxial cable in black.
Technical data | |
Data transfer rate | 10 Gbps |
Connector type | SFP |
Conductor cross section AWG | 30 AWG |
VCR ratio | Min. 32.5 dB |
Physical parameters and operating conditions | |
Minimum cable bending radius | 23.5 mm |
Wave impedance of the cable | 100 Ohms |
Voltage | 30 VAC |
Current | 0,5 A |
Operating temperature | -40 to 85°C |
Storage temperature | -40 to 85°C |
Operating humidity | 45% to 75% |
Storage humidity | 45% to 75% |
Certificates | SFP MSA (Multi-Source Agreement) SFF-8431 EIA 364 UL 94 |
No, you don't have to. The cable already has a built-in SFP module .