D-LINK DEM-CB300S | DAC Cable | 10GbE, SFP+, 300 cm
CODE: D-LINK DEM-CB300S
EN
The dual-axis passive 10G SFP cable is designed to connect switches with 10G ports to each other. The DEM-CB300S cable has SFP connectors and is used for connection distances up to 3 m.
This 10G SFP cable supports data rates up to 10 Gbps and offers extremely low latency and power consumption compared to other cable types designed according to standards such as 10GBASE-CX4 or 10GBASE-T (category 6/6a). This makes the cable an optimal solution for high bandwidth over short distances, which is ideal for applications such as data centers.
Technical data | |
Data transfer rate | 10 Gbps |
Connector type | SFP |
Conductor cross section AWG | 30 AWG |
VCR ratio | Min. 32.5 dB |
Physical parameters and operating conditions | |
Minimum cable bending radius | 23.5 mm |
Wave impedance of the cable | 100 Ohms |
Voltage | 30 VAC |
Current | 0,5 A |
Operating temperature | -40 to 85°C |
Storage temperature | -40 to 85°C |
Operating humidity | 45% to 75% |
Storage humidity | 45% to 75% |
Certificates | SFP MSA (Multi-Source Agreement) SFF-8431 EIA 364 UL 94 |
No, you don't have to. The cable already has a built-in SFP module .