Network cable UTP Cat. 6 is most often used for local area networks. Category 6 covers cabling that requires bandwidth up to 250 MHz and band width of 200 Mbps, which anticipates implementation of Gigabit Ethernet (4 x 250 MHz = 1 GHz) and 622 Mbps ATM transmission. The presented product is built with 4 pairs of twisted cables, which eliminates both mutual and electromagnetic interferences. Made of pure copper, the cables are surrounded by HDPE sheath with diameter 0.92 ± 0.03 mm, which is characterized by increased density and particularly high diaelectric insulation. The cables are also protected by an outer PVC sheath with a thickness of 0.50 ± 0.05 mm. The package contains 305 meters of cable.
The package includes a self-winding reel that guarantees comfortable unwinding of the cable without the risk of tangling.
The cable is designed for indoor use. It is ideal for building installations in offices or houses. Twisted-pair cable is also often used in CCTV installations, because one cable can transmit both the video signal from several cameras and power supply.
| Features / filters | |
| Cabel for assembly | Inside the building |
| Cable category | Cat.6 |
| Length | 100m |
| Shielding type | U/UTP |
| Cable length | 100 |
| Cable shielding | U/UTP (UTP) |
| Cable standard | Cat6 |
| Cable top coat | PVC |
| Cable type | Installation cables |
| Colour | Grey |
| Connector 1 | No |
| Connector 1 gender | No |
| Connector 2 | No |
| Connector 2 gender | No |
| Connector contacts plating | Copper |
| Jacket material | Nylon/Polyvinyl Chloride (PVC) |
| Product colour | Grey |
| Cable | |
| Material | Pure copper |
| Diameter | 0.50 mm |
| Coating | |
| Material | HDPE |
| Diameter | 0.92 ± 0.03 mm |
| Outer jacket | |
| Thickness | 0.50 ± 0.05 mm |
| Outside diameter | 5.8 ± 0.2 mm |
| Material | PVC |
| Rip Cord | Yes |
| Physical properties of the outer coating (test 100ºC x 24 h x 7 d) | |
| Tensile strength before test (Mpa) ≥ 10.0 | Pullout (%) ≥ 125 |
| Tensile strength after test (Mpa) ≥ 8.0 | Pullout (%) ≥ 100 |
| Cold bending (-20 ± 2ºC x 4 h) | 8 x cable diameter, no visible cracks |
| Electrical parameters (20ºC) | |
| 1.0-250.0 MHz Impedance (Ohms) | 100 ± 15 |
| 1.0-250.0 MHz latency (ns/100 m) | ≤ 45 |
| Capacity (pf/100 m) | Max 330 |
| DC Resistance (Ohm/100 m) | Max. 9.5 |
Extralink CAT6 UTP (U/UTP) V2 is mainly used in installations where there are no other cables in close proximity, such as electrical or other signal cables that could directly or indirectly affect the signal flowing through the cable, where the intended bit rate will not be more than 1Gbps.
U/UTP (formerly UTP) is an abbreviation for one of the common cable constructions, meaning unshielded twisted pair.
