EN
Jikaida JKD-808COM gas sensor is designed for automatic control of natural gas inside domestic premises (small house, kitchen, apartment, bungalow, cottage, etc.) where gas consuming appliances are installed.
Jikaida JKD-808COM gas sensor (Gas Alarm) warns by sound and light if the gas concentration is above the maximum permissible level in the room.
Premises of residential (private house, bungalow, townhouse, apartment building), business, public and administrative buildings inside of which appliances with gas burners are installed for cooking, heating and hot water systems.
Features / filters | |
AC input frequency | 50 - 60 |
AC input voltage | 230 |
Alarm decibels | 110 |
Battery voltage | 9 |
Best uses | Home, Office |
Built-in display | Yes |
Connectivity technology | Wired & Wireless |
Depth | 73 |
Detected gas types | Carbon monoxide (CO), Methane, Natural gas, Propane |
Display type | LCD |
Height | 125 |
Housing material | Plastic |
Interconnectable | No |
LED indicators | Alarm, Fault, Power |
Mounting kit | Yes |
Mounting type | Wall |
Power source type | AC, Battery |
Product colour | White |
Quantity per pack | 1 |
Storage relative humidity (H-H) | 10 - 95 |
Storage temperature (T-T) | 0 - 50 |
Test button | Yes |
Weight | 200 |
Width | 42 |
Basic general data | |
Manufacturer | Jikaida |
Model | JKD-808COM |
Type | Gas and carbon monoxide sensor |
Power supply | Battery 9V or 230V 50-60Hz |
Volume level | 110 dB/m |
Warm-up time | 180s |
Vigilance | 10%-95% |
Alarm activation level | 2500PPM(±1500PPM) |
Sensor sensitivity | 0-9999PPM |
Operating temperature | 0-50 C |
Dimensions | 125 x 73 x 42 mm |
Weight | 200 g |
The Jikaida JKD-808COM has a slot for a 9V Crone battery and if the battery is present in the unit, the gas sensor will operate normally. (The battery is not supplied with the unit)