Steel mast for safe mounting of a satellite or terrestrial antenna. It is made of galvanized steel, so it is resistant to corrosion and other types of damage.
The height of the mast is 100 cm and its diameter is 38 x 1.5 mm. With the help of a bracket it can be mounted to the building facade or to the chimney.
| Features / filters | |
| Handle type | Mast |
| Bracket dimensions | 1000 mm |
| Coating | Zinc coating |
| Material | Stainless steel |
| Maximum load weight | 14 |
| Product colour | Steel |
| Proper use | General purpose |
| Quantity per pack | 1 |
| Type | Bracket |
| Basic technical parameters | |
| Height | 1000 mm |
| Diameter | 38 x 1.5 mm |
| Material | Steel |
| Coating | Zinc |
The antenna should be installed in a place with full visibility of the sky, e.g. on a chimney, balcony, building facade or antenna mast. The antenna's antenna's head should be facing the satellite from which the signal will be received. Avoid limiting visibility by buildings or trees.
Depending on the chosen location, we have a choice of chimney clamps, antenna masts, balcony brackets, or high-mounted masonry brackets.
The antenna mast can be fixed to the building's facade, wall or chimney with a suitable bracket. In the case of using cybrands we will be able to avoid the need to drill holes.
Choosing a larger canopy provides better signal reception during bad weather conditions. The optimum diameter of the canopy in Poland is considered to be 85 cm. It should be remembered that the bigger antenna we choose, the more solid grip will be required.
To determine the direction in which the antenna will be facing, you can use one of the applications that will show us the nearby DVB-T transmitters. After comparing them, we can choose the one that will be best for us, and with the help of the application set the antenna in the right direction.
