EN
Robust, steel pole bracket allowing to mount NanoStation Loco M5 Ubiquiti devices. It is made of galvanized steel, which makes it resistant to corrosion and other damage.
The holder can be mounted on a mast with a maximum diameter of 50 mm. Its construction allows for adjustment of the device's tilt angle by 10 degrees. M5 screws are used for mounting the bracket.
Features / filters | |
Handle type | Pole holder |
Basic technical parameters | |
Regulation | +/- 10 degrees |
Screws | M5 |
Mast diameter | max. 50 mm |
Material | Steel |
Coating | Zinc |
To configure the devices, you must first assign them different IP addresses. Then set the former as an access point and the latter as a client. After these actions the devices can be paired.
You can find the firmware for your device in the download section on the official Ubiquiti website.
Default IP address for the device is 192.168.1.20
The antenna mast can be fixed to the building's facade, wall or chimney with a suitable bracket. In the case of using cybrands we avoid the need to drill holes.
Use UTP twisted-pair cable to connect the device to the PoE adapter and then connect the PoE adapter to the network card or network switch using another twisted-pair cable. The correct connection will be indicated by the corresponding LED lighting up.