EN
White single-mode patchcord cable with a length of 30m, cable diameter of 3mm, terminated with SC/APC-SC/APC connectors is used to connect optical network equipment such as switches or converters. The product is made of material that does not emit harmful gases during fire(LSOH). The G657A2 fiber has a higher resistance to bending. Patchcords are also widely used in FTTH networks to connect OLT and ONU/ONT devices.
Features / filters | |
Cable category | Single-Mode |
Fiber standard | G.657.A2 |
Length | 30m |
Types of connectors | SC/APC-SC/APC |
Cable diameter | 3,0mm, 3, |
Cable length | 30 |
Cable type | FTTH |
Connector 1 | SC/APC |
Connector 1 gender | Male |
Connector 2 | SC/APC |
Connector 2 gender | Male |
Connector material | Ceramic |
Fiber mode structure | Single-mode |
Fiber optic patchcord type | Simplex |
Fibre optic type | G.657.A2 |
Full duplex | No |
Jacket material | Low smoke zero halogen (LSZH) |
Plug and Play | Yes |
Product colour | Green, White |
Quantity per pack | 1 |
Test protocol included | Yes |
G.652 - the standard defines 4 fiber versions: A, B, C, D. Dedicated to 10Gbps and 40Gbps systems. Wavelengths range from 1310nm to 1625nm, bending radius 30mm.
G.655 - fiber dedicated to systems using DWDM in the 3rd transmission window. Wavelength is 1550-1625nm, bending radius 30mm.
G.656 - fiber dedicated to work in broadband systems using both DWDM and CWDM. It is designed to operate at wavelengths from 1460 to 1625 nm.
G.657 - often referred to as enhanced G.652.D. G.657 fiber comes in several versions. The main advantage of the fiber is its increased mechanical resistance: the minimum bending radius of this fiber is 7.5-15mm (depending on the version).