Extralink Sedir is a media converter that converts the transmission of media between FTP/UTP copper cables and SFP (Small Form-Factor Pluggable) optical transmitter-receiver. The media converter from Extralink is designed to meet the huge needs of Ethernet deployment and allows it to be extended via fiber optic cable over a maximum distance of 80 km (depending on the SFP module used). Installation and operation procedures are very simple. The device status can be monitored locally by a set of diagnostic LEDs on the front panel.
The Extralink Sedir model is a cheap substitute for TP-LINK MC220L media converter.
| Features / filters | |
| Data transmission speed | Gigabit Ethernet |
| Transmission distance | Over 20km |
| Type of fiber optic connector | SFP slot |
| AC input frequency | 50 - 60 |
| Auto MDI/MDI-X | Yes |
| Connectivity technology | Wired |
| Converter input interface | 10Base-T,100Base-TX,100Base-T,1000Base-T,1000Base-TX |
| Converter output interface | 1000Base-FX |
| Copper ethernet cabling technology | 10BASE-T,10BASE-TX,100BASE-T,100BASE-TX,1000BASE-T,1000BASE-TX |
| Data transfer rate | 1000 |
| Depth | 94 |
| DIN rail mounting | No |
| Duplex system | Full |
| Ethernet interface type | Gigabit Ethernet |
| Ethernet LAN data rates | 10,100,1000 |
| Fiber ethernet cabling technology | 1000BASE-FX |
| Fiber optic connector | SFP |
| Height | 26.5 |
| Hot-swap | Yes |
| Housing material | Metal |
| Input current | 0.3 |
| Input voltage | 100 - 240 |
| Internal | Yes |
| Jumbo frames | 9216 |
| Jumbo frames support | Yes |
| LED indicators | Activity, Link, Power |
| Maximum data transfer rate | 1000 |
| Maximum transfer distance | 10000 |
| Networking standards | IEEE 802.3,IEEE 802.3ab,IEEE 802.3u,IEEE 802.3z |
| Output current | 1 |
| Output voltage | 5 |
| Plug and Play | Yes |
| Power over Ethernet (PoE) | No |
| Product colour | Black |
| Reset button | No |
| Wavelength | 1 |
| Web-based management | No |
| Width | 70.6 |
